NBA3N206S数据手册开发板套件编程器的评估演示板及套件规格书PDF

描述 Description

The NBA3N206S is a 3.3 V supply differential Multipoint Low
Voltage (M-LVDS) line Driver and Receiver for automotive applications. NBA3N206S offers the
Type 2 receiver threshold at 0.1 V.
The NBA3N206S has Type-2 receivers that detect the bus state with
as little as 50 mV of differential input voltage over a common-mode
voltage range of -1 V to 3.4 V. Type-2 receivers include an offset
threshold to provide a detectable voltage under open-circuit, idle-bus,
and other faults conditions.
NBA3N206S supports Simplex or Half Duplex bus configurations.

特性 Features

• Low−Voltage Differential 30Ω to 55Ω Line Drivers and Receiversfor Signaling Rates Up to 200 Mbps
• Type−2 Receivers Provide an Offset (100 mV) Threshold to DetectOpen−Circuit and Idle−Bus Conditions
• Controlled Driver Output Voltage Transition Times for ImprovedSignal Quality
• −1 V to 3.4 V Common−Mode Voltage Range Allows Data TransferWith up to 2 V of Ground Noise
• Bus Pins High Impedance When Disabled or VCC ≤ 1.5 V
• M−LVDS Bus Power Up/Down Glitch Free
• Operating range: VCC = 3.3 ±10% V (3.0 to 3.6 V)
• Operation from –40°C to +125°C.
• AEC−Q100 Qualified and PPAP Capable
• These are Pb-Free Devices

应用 Application

• Low−Power High−Speed Short−Reach Alternative to TIA/EIA−485
• Backplane or Cabled Multipoint Data and Clock Transmission
• Telecom
• Networking
• Automotive
• Cellular Base Stations
• Central−Office Switches
• Network Switches and Routers
• Automotive

简介

NBA3N206S属于开发板套件编程器的评估演示板及套件。由制造生产的NBA3N206S评估和演示板及套件该系列产品提供了一种方便的方法，在经过验证的实施环境中评估某些重点器件的性能或特性。评估方法通常有完善的文档说明，并且视乎具体情况由评估软件提供支持。产品通常由印刷电路板组成，板上已装有重点器件以及必要或有用的支持元器件，另外也可能包括其他组件，例如电缆或电源。对于数量特别多或类别独特的器件类别(如 ADC、DAC 和开关模式电源)，评估平台可组合为一个单独的产品系列。