MPQ70340FS-AEC1数据手册MPS中文资料规格书

描述 Description

The MPQ70340FS-AEC1 is a power management IC (PMIC) solution that integrates three high-efficiency step-down DC/DC converters and a low-noise LDO. Unique dual-stage 36V buck architecture maximizes efficiency for the 1.8V image sensor input/output (I/O) rail in the CMOS sensor in high-resolution camera modules.

Constant-on-time (COT) control with a phase-locked loop (PLL) provides a fast transient response time. During forced continuous conduction mode (FCCM), the fixed 2.2MHz switching frequency (fSW) greatly reduces external inductor and capacitor requirements. 

The PMBus interface allows for application flexibility. The output voltage (VOUT), power sequence, and protection thresholds can all be adjusted via the PMBus. Fault statuses can also be monitored. Robust fault protections include under-voltage lockout (UVLO), over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and thermal shutdown (TSD). The one-time programmable (OTP) memory is used to set such functions from the factory.

The MPQ70340FS-AEC1 is ISO 26262 ASIL-B hardware capable. Functional safety features include analog built-in self-testing (ABIST), diagnostics, a windowed watchdog timer, and a PG output pin. This PMIC is developed under MPS's advanced MPSafeTM functional safety product development process, which has been independently certified to meet ISO 26262 guidelines.

The MPQ70340FS-AEC1 minimizes external component count, and is available in a space-saving QFN-15 (2.5mmx3.5mm) package with wettable flanks. It is available in AEC-Q100 Grade 1.

特性 Features

• Optimized for Automotive Cameras:
• Buck 1: 600mA with 3.5V to 36V Input Voltage (VIN)
• Buck 2: 600mA with 3.5V to 36V VIN
• Buck 3: 1A with 2.5V to 5.5V VIN
• Low-Dropout (LDO) Regulator: 200mA for Large CMOS Sensors

• Optimized for EMC/EMI Reduction:
• 2.2MHz Fixed Switching Frequency (fSW)
• Symmetric Input Capacitor
• CISPR 25 Class 5 Compliant
• MeshConnectTM Flip-Chip Package

• Additional Features:
• Selectable Discontinuous Conduction Mode (DCM) or Forced Continuous Conduction Mode (FCCM)
• Windowed Watchdog Timer
• Over-Current Protection (OCP) with Valley-Current Detection and Hiccup mode
• Power Good (PG) Output
• Compliant PMBus Interface with Packet Error Checking (PEC)
• Available in a QFN-15 (2.5mmx3.5mm) Package with Wettable Flanks
• Available in AEC-Q100 Grade 1

• Functional Safety:
• ISO 26262 ASIL-B Hardware Capable
• Integrated Analog Built-In Self-Testing (ABIST) and Reference Monitor
• Failure Modes, Effects, and Diagnostic Analysis (FMEDA)
• Safety Manual