Features

• High-performance, 32-bit e600 core, that implements the

Power Architecture™ technology

– Eleven execution units and three register files

– Two separate 32-Kbyte instruction and data level 1 (L1)

caches

– Integrated 256-Kbyte, eight-way set-associative unified

instruction and data level 2 (L2) cache with ECC

– 36-bit real addressing

– Multiprocessing support features

– Power and thermal management

• MPX coherency module (MCM)

• Address translation and mapping units (ATMUs)

• DDR/DDR2 memory controller

– 64- or 32-bit data path (72-bit with ECC)

– Up to 533-MHz DDR2 data rate and up to 400 MHz

DDR data rate

– Up to 16 Gbytes memory

• Enhanced local bus controller (eLBC)

– Operating at up to 133 MHz

– Eight chip selects

• Display interface unit

– Maximum display resolution: 1280 × 1024

– Maximum display refresh rate: 60 Hz

– Display color depth: up to 24 bpp

– Display interface: parallel TTL

• OpenPIC-compliant programmable interrupt controller

(PIC)

– Supports 16 programmable interrupt and processor task

priority levels

– Supports 12 discrete external interrupts and 48 internal

interrupts

– Eight global high resolution timers/counters that can

generate interrupts

– Support for PCI Express message-shared interrupts

(MSIs)

• Dual I2C controllers

– Master or slave I2C mode support

– Boot sequencer

– Optionally loads configuration data from serial ROM at

reset via I2C interface

– Can be used to initialize configuration registers and/or

memory

– Supports extended I2C addressing mode

• DUART

• Fast InfraRed interface

• Serial peripheral interface

– Master or slave support

• Dual integrated four-channel DMA controllers

– All channels accessible by both local and remote masters

– Supports transfers to or from any local memory or I/O

port

– Ability to start and flow control each DMA channel

from external 3-pin interface

• Watchdog timer

• Dual global timer modules

• 32-bit PCI interface, 33 or 66 MHz bus frequency

• Dual PCI Express® controllers

– PCI Express 1.0a compatible

– PCI Express controller 1 supports x1, x2, and x4 link

widths; PCI Express controller 2 supports x1, x2, x4, and

x8 link widths

– 2.5 Gbaud, 2.0 Gbps lane

• Device performance monitor

– Supports eight 32-bit counters that count the occurrence

of selected events

– Ability to count up to 512 counter-specific events

– Supports 64 reference events that can be counted on any

of the 8 counters

– Supports duration and quantity threshold counting

– Burstiness feature that permits counting of burst events

with a programmable time between bursts

– Triggering and chaining capability

– Ability to generate an interrupt on overflow

• IEEE Std 1149.1™ compliant, JTAG boundary scan

• Available as 783-pin, flip-chip, plastic ball grid array

(FC-PBGA)