첨4 Divider

Description The MC10/100EP33 is an integrated ÷4 divider. The differential clock inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. V

文件：89.45 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V 5VECL / 4 Divider

Description The MC10/100EP33 is an integrated ÷4 divider. The differential clock inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. V

文件：79.41 Kbytes 页数：12 Pages

ONSEMI

安森美半导体

Divider

文件：192.2 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

3.3V / 5V ECL 첨4 Divider

文件：165.12 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

3.3 V / 5.0 V ECL ÷·4 分频器

The MC10/100EP33 is an integrated divide by 4 divider. The differential clock inputs.The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage.VBB may al • 320ps Propagation Delay\n• Maximum Frequency > 4 GHz Typical\n• PECL Mode Operating Range: VCC= 3.0 V to 5.5 V with VEE= 0 V\n• NECL Mode Operating Range: VCC= 0 V with VEE= -3.0 V to -5.5 V\n• Open Input Default State\n• Safety Clamp on Inputs\n• Q Output will default LOW with inputs open or at V;

ONSEMI

安森美半导体

첨4 Divider

Description The MC10/100EP33 is an integrated ÷4 divider. The differential clock inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. V

文件：89.45 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V 5VECL / 4 Divider

Description The MC10/100EP33 is an integrated ÷4 divider. The differential clock inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. V

文件：79.41 Kbytes 页数：12 Pages

ONSEMI

安森美半导体

첨4 Divider

Description The MC10/100EP33 is an integrated ÷4 divider. The differential clock inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. V

文件：89.45 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

3.3V 5VECL / 4 Divider

Description The MC10/100EP33 is an integrated ÷4 divider. The differential clock inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. V

文件：79.41 Kbytes 页数：12 Pages

ONSEMI

安森美半导体

3.3V 5VECL / 4 Divider

Description The MC10/100EP33 is an integrated ÷4 divider. The differential clock inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. V

文件：79.41 Kbytes 页数：12 Pages

ONSEMI

安森美半导体