3.3V 5V ECL / 2 Divider

Description The MC10/100EP32 is an integrated ÷2 divider with differential CLK inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VB

文件：85.41 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

3.3V / 5V ECL 첨2 Divider

文件：165.32 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

3.3 V / 5.0 V ECL ÷·2 分压器

The MC10/100EP32 is an integrated divide by 2 divider with differential CLK inputs.The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may als • 350ps Typical Propagation Delay\n• Maximum Frequency > 4 GHz Typical\n• PECL Mode Operating Range: VCC= 3.0 V to 5.5 Vwith VEE= 0 V\n• NECL Mode Operating Range: VCC= 0 Vwith VEE= –3.0 V to –5.5 V\n• Open Input Default State\n• Safety Clamp on Inputs\n• Q Output will default LOW with inputs open o;

ONSEMI

安森美半导体

3.3V 5V ECL / 2 Divider

Description The MC10/100EP32 is an integrated ÷2 divider with differential CLK inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VB

文件：85.41 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

3.3V 5V ECL / 2 Divider

Description The MC10/100EP32 is an integrated ÷2 divider with differential CLK inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VB

文件：85.41 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

3.3V 5V ECL / 2 Divider

Description The MC10/100EP32 is an integrated ÷2 divider with differential CLK inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VB

文件：85.41 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

3.3V 5V ECL / 2 Divider

Description The MC10/100EP32 is an integrated ÷2 divider with differential CLK inputs. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VB

文件：85.41 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

Evaluation Board Manual for High Frequency SOIC 8

文件：202.47 Kbytes 页数：20 Pages

ONSEMI

安森美半导体

3.3V / 5V ECL 첨2 Divider

文件：165.32 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

3.3V / 5V ECL 첨2 Divider

文件：165.32 Kbytes 页数：11 Pages

ONSEMI

安森美半导体