MC100EP16VS中文资料3.3V / 5V ECL Differential Receiver/Driver with Variable Output Swing数据手册ONSEMI规格书

描述 Description

The MC100EP16VS is a differential receiver with variable output amplitude. The device is functionally equivalent to the 100EP16 with an input pin that controls the amplitude of the outputs. The VCTRL input pin controls the output amplitude of the EP16VS and is referenced to VCC. (See Figure 4.) The operational range of the VCTRL input is from ≤ VBB (max output amplitude) to VCC (min output amplitude). (See Figure 3.) A variable resistor between the VCC and VBB pins, with the wiper driving VCTRL, can control the output amplitude. Typical application circuits and a VCTRL Voltage vs. Output Amplitude graph are described in this data sheet. When left open, the VCTRL pin will be internally pulled down to VEE and operate as a standard EP16, with 100% output amplitude.

The VBB pin, an internally generated voltage supply, is available to this device only. For single−ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.

特性 Features

• 220 ps Propagation Delay
• Maximum Frequency > 4 GHz Typical (See Graph)
• The 100 Series Contains Temperature Compensation
• PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
• NECL Mode Operating Range: VCC = 0 V with VEE = −3.0 V to −5.5 V
• Open Input Default State
• Q Output Will Default LOW with Inputs Open or at VEE
• Pb−Free Packages are Available\r

简介

MC100EP16VS属于集成电路（IC）的专用逻辑器件。由制造生产的MC100EP16VS专用逻辑器件专用逻辑 IC 设计提供应用特定的逻辑输出类型，例如 BCD 速率倍增、可寻址扫描端口、总线终端阵列、CML 驱动器、比较器、ABT 扫描测试、二进制全加法器、互补对加逆变器、可配置缓冲器、触点颤动消除器、晶体振荡器、延迟元件、差分接收器、LVTTL 到 GTLP 收发器、存储器解码器、电源良好检测器和分频器。