MC100EP16VC中文资料Differential Driver / Receiver with High Gain and Enable Output数据手册ONSEMI规格书

描述 Description

The EP16VC is a world-class differential receiver/driver. The device is functionally equivalent to the EP16 and LVEP16 devices but with high gain and enable output.The EP16VC provides an ENbar input which is synchronized with the data input (D) signal in a way that provides litchless gating of the QHG and QHGbar outputs.When the ENbar signal is LOW, the input is passed to the outputs and the data output equals the data input. When the data input is HIGH and ENbar goes HIGH, it will force the QHG LOW and the QHGbar HIGH on the next negative transition of the data input. If the data input is LOW when the ENbar goes HIGH, the next data transition to a HIGH is ignored and QHG remains LOW and QHGbar remains HIGH. The next positive transition of the data input is not passed on to the data outputs under these conditions. The QHG and QHGbar outputs remain in their disabled state as long as the ENbar input is held HIGH or LOW. The ENbar input has no influence on the Qbar output and the data input is passed on (inverted) to this output whether ENbar is HIGH or LOW. This configuration is ideal for crystal oscillator applications where the oscillator can be free running and gated on and off synchronously without adding extra counts to the output. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.The 100 Series contains temperature compensation.

特性 Features

• 310 ps Typical Prop Delay Qbar, 380 ps Typical Prop Delay QHG, QHGbar
• Gain > 200
• Maximum Frequency > 3 GHz Typical
• PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
• NECL Mode Operating Range: VCC = 0 V with VEE = –3.0 V to –5.5 V
• Open Input Default State
• QHG Output Will Default LOW with D inputs Open or at VEE
• VBB Output

应用 Application

• Crystal Oscillators

简介

MC100EP16VC属于集成电路（IC）的专用逻辑器件。由制造生产的MC100EP16VC专用逻辑器件专用逻辑 IC 设计提供应用特定的逻辑输出类型，例如 BCD 速率倍增、可寻址扫描端口、总线终端阵列、CML 驱动器、比较器、ABT 扫描测试、二进制全加法器、互补对加逆变器、可配置缓冲器、触点颤动消除器、晶体振荡器、延迟元件、差分接收器、LVTTL 到 GTLP 收发器、存储器解码器、电源良好检测器和分频器。