MC100E196集成电路（IC）的延迟线规格书PDF中文资料

MC100E196属于集成电路（IC）的延迟线。由安森美半导体公司制造生产的MC100E196延迟线时钟延迟线产品族中的产品属于数字器件，用于在数字信号中引入时间延迟，以便将提交给器件输入的信号跃迁，经过某一已知时间之后在输出端复现。它们常用于高速数字系统，以校正或补偿不同信号路径之间的信号传播时间的偏差。这些器件可用于产生固定、可选或可变持续时间的延迟。

Description

The MC10E/100E196 is a programmable delay chip (PDC) designed primarily for very accurate differential ECL input edge placement applications.

The delay section consists of a chain of gates and a linear ramp delay adjust organized as shown in the logic symbol. The first two delay elements feature gates that have been modified to have delays 1.25 and 1.5 times the basic gate delay of approximately 80 ps.

These two elements provide the E196 with a digitally-selectable resolution of approximately 20 ps. The required device delay is selected by the seven address inputs D[0:6], which are latched on chip by a high signal on the latch enable (LEN) control.

The FTUNE input takes an analog voltage and applies it to an internal linear ramp for reducing the 20 ps Least Significant Bit (LSB) minimum resolution still further. The FTUNE input is what differentiates the E196 from the E195.

An eighth latched input, D7, is provided for cascading multiple PDC’s for increased programmable range. The cascade logic allows full control of multiple PDC’s, at the expense of only a single added line to the data bus for each additional PDC, without the need for any external gating.

The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage.

VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 μF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.

The 100 Series contains temperature compensation.

Features

• 2.0 ns Worst Case Delay Range

• ≈20 ps/Delay Step Resolution

• Linear Input for Tighter Resolution

• >1.0 GHz Bandwidth

• On Chip Cascade Circuitry

• PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V

• NECL Mode Operating Range: VCC = 0 V with VEE = −4.2 V to −5.7 V

• Internal Input 50 kΩ Pulldown Resistors

• ESD Protection:

Human Body Model; > 1 kV,

Machine Model; > 75 V

• Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test

• Moisture Sensitivity Level: Pb = 1; Pb−Free = 3

For Additional Information, see Application Note AND8003/D

• Flammability Rating: UL 94 V−0 @ 1.125 in, Oxygen Index: 28 to 34

• Transistor Count = 425 devices

• Pb−Free Packages are Available*