4M (512K X 8) BIT

■ GENERAL DESCRIPTION The MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCCsupply. A 12.0 V VPPis no

文件：424.68 Kbytes 页数：40 Pages

Fujitsu

富士通

FLASH MEMORY 4M (512K x 8) BIT

■ GENERAL DESCRIPTION The MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCC supply. A 12.0 V VPP is no

文件：421.95 Kbytes 页数：41 Pages

spansionSPANSION

飞索飞索半导体

FLASH MEMORY 4M (512K x 8) BIT

■ GENERAL DESCRIPTION The MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCC supply. A 12.0 V VPP is no

文件：421.95 Kbytes 页数：41 Pages

spansionSPANSION

飞索飞索半导体

4M (512K X 8) BIT

■ GENERAL DESCRIPTION The MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCCsupply. A 12.0 V VPPis no

文件：424.68 Kbytes 页数：40 Pages

Fujitsu

富士通

4M (512K X 8) BIT

■ GENERAL DESCRIPTION The MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCCsupply. A 12.0 V VPPis no

文件：424.68 Kbytes 页数：40 Pages

Fujitsu

富士通

FLASH MEMORY 4M (512K x 8) BIT

■ GENERAL DESCRIPTION The MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCC supply. A 12.0 V VPP is no

文件：421.95 Kbytes 页数：41 Pages

spansionSPANSION

飞索飞索半导体

FLASH MEMORY 4M (512K x 8) BIT

■ GENERAL DESCRIPTION The MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCC supply. A 12.0 V VPP is no

文件：421.95 Kbytes 页数：41 Pages

spansionSPANSION

飞索飞索半导体

4M (512K X 8) BIT

■ GENERAL DESCRIPTION The MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCCsupply. A 12.0 V VPPis no

文件：424.68 Kbytes 页数：40 Pages

Fujitsu

富士通

FLASH MEMORY CMOS 4M (512K ×8) BIT

■GENERAL DESCRIPTION\nThe MBM29F040C is a 4M-bit, 5.0 V-only Flash memory organized as 512K bytes of 8 bits each. The MBM29F040C is offered in a 32-pin PLCC and 32-pin TSOP(I) package. This device is designed to be programmed in-system with the standard system 5.0 V VCCsupply. A 12.0 V VPPis not req • Single 5.0 V read, program and erase Minimizes system level power requirements\n• Compatible with JEDEC-standard commands Uses same software commands as E2PROMs\n• Compatible with JEDEC-standard byte-wide pinouts\n   32-pin PLCC (Package suffix: PD)\n   32-pin TSOP(I) (Package suffix: PF)\n   32-p;

Fujitsu

富士通