MAX810数据手册集成电路（IC）的监控器规格书PDF

描述 Description

The MAX809/NCV809 and MAX810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 10 µsec of VCC falling through the reset voltage threshold. Reset is maintained active for a timeout period which is trimmed by factory after VCC rises above the reset threshold. The MAX810 has an active-high RESET output while the MAX809 has an active-low RESETbar output. Both devices are available in a SOT-23 and SC-70 packages. The MAX809/810 are optimized to reject fast transient glitches on The VCCline. Low supply current of 0.5 µA (VCC = 3.3 V) makes these devices suitable for battery powered applications.

特性 Features

• NCV Version for Automotive
• AEC-Q100 Qualified
• Precision VCC Monitor for 1.5 V, 1.8V, 2.5 V, 3.0 V, 3.3 V and 5.0 V supplies
• Precision Monitoring Voltages from 1.2 V to 4.9 V Available in 100 mV Steps
• Four Guaranteed Minimum RESET Output Duration(1ms, 20ms, 100ms and 140ms)
• RESET Output Guaranteed to VCC = 1.0 V
• Low 1.0 µA Supply Current
• VCC Transient Immunity
• Small SOT-23 and SC-70 Package
• No External Components
• Wide Operating Temperature: -40°C to 105°C

应用 Application

• Computers
• Embedded Systems
• Battery Powered Equipment
• Critical Microprocessor Power Supply Monitoring
• Body Electronic
• Braking
• Infotainment
• Instrument Cluster
• Nagivator
• Occupant Comfort
• Occupant Protection
• Powertrain

简介

MAX810属于集成电路（IC）的监控器。由制造生产的MAX810监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。