MAX6410数据手册集成电路（IC）的监控器规格书PDF

描述 Description

The MAX6406–MAX6411 is a family of ultra-low power circuits used for monitoring battery, power-supply, and regulated system voltages. Each detector contains a precision bandgap reference comparator and is trimmed to specified trip threshold voltages. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring system voltages from 2.5V to 5.0V. A manual reset input is also included.
The MAX6406–MAX6411 assert a signal whenever the VCC supply voltage falls below a preset threshold. These devices are differentiated by their output logic configurations and preset threshold voltages. The MAX6406/MAX6409 (push-pull) and the MAX6408/MAX6411 (open-drain) have an active-low output (active-low OUT is logic low when VCC is below VTH). The MAX6407/MAX6410 have an active-high push-pull output (OUT is logic high when VCC is below VTH). All parts are guaranteed to be in the correct output logic state for VCC down to 1V. The detector is designed to ignore fast transients on VCC. The MAX6406/MAX6407/MAX6408 have voltage thresholds between 2.20V and 3.08V in approximately 100mV increments. The MAX6409/MAX6410/MAX6411 have voltage thresholds between 3.30V and 4.63V in approximately 100mV increments.
Ultra-low supply current of 500nA (MAX6406/MAX6407/MAX6408) makes these parts ideal for use in portable equipment. These devices are available in 4-bump chip-scale packages (UCSP™).

特性 Features

·Tiny 4-Bump (2 x 2) UCSP (See UCSP Reliability Section for More Details).
·\t70% Smaller Than SC70 Packages
·Ultra-Low 500nA Supply Current (MAX6406/MAX6407/MAX6408)
·\tFactory-Trimmed Reset Thresholds from 2.20V to 4.63V in Approximately 100mV Increments
·\t±2.5% Threshold Accuracy (-40°C to +85°C)
·Manual Reset Input
·\tGuaranteed OUT Valid to VCC = 1.0V
·Three Reset Output Logic Options: Active-Low Push-Pull, Active-High Push-pull, and Active-Low Open-Drain
·Immune to Short VCC Transients
·\tNo External Components

应用 Application

·蜂窝电话
·MP3播放器
·寻呼机
·PDA
·便携式电池供电设备

简介

MAX6410属于集成电路（IC）的监控器。由制造生产的MAX6410监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。