MAX6388数据手册集成电路（IC）的监控器规格书PDF

描述 Description

The MAX6381–MAX6390 microprocessor (µP) supervisory circuits monitor power-supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset output asserts and remains asserted for a minimum reset timeout period after VCC rises above the reset threshold. Reset thresholds are available from +1.58V to +4.63V, in approximately 100mV increments. Seven minimum reset timeout delays ranging from 1ms to 1200ms are available.
The MAX6381/MAX6384/MAX6387 have a push-pull active-low reset output. The MAX6382/MAX6385/MAX6388 have a push-pull active-high reset output, and the MAX6383/MAX6386/MAX6389/MAX6390 have an open-drain active-low reset output. The MAX6384/MAX6385/MAX6386 also feature a debounced manual reset input (with internal pullup resistor). The MAX6387/MAX6388/MAX6389 have an auxiliary input for monitoring a second voltage. The MAX6390 offers a manual reset input with a longer VCC reset timeout period (1120ms or 1200ms) and a shorter manual reset timeout (140ms or 150ms).
The MAX6381/MAX6382/MAX6383 are available in 3-pin SC70 and 6-pin µDFN packages and the MAX6384–MAX6390 are available in 4-pin SC70 and 6-pin µDFN packages.

特性 Features

• Factory-Set Reset Threshold Voltages Ranging from +1.58V to +4.63V in Approximately 100mV Increments
• ±2.5% Reset Threshold Accuracy Over Temperature (-40°C to +125°C)
• Seven Reset Timeout Periods Available: 1ms, 20ms, 140ms, 280ms, 560ms, 1120ms, 1200ms (min)
• 3 Reset Output Options
• Active-Low Push-Pull
• Active-High Push-Pull
• Active-Low Open-Drain
• Reset Output State Guaranteed Valid Down to VCC = 1V
• Manual Reset Input (MAX6384/MAX6385/MAX6386)
• Auxiliary RESET IN (MAX6387/MAX6388/MAX6389)
• VCC Reset Timeout (1120ms or 1200ms)/Manual Reset Timeout (140ms or 150ms) (MAX6390)
• Negative-Going VCC Transient Immunity
• Low Power Consumption of 6µA at +3.6V and 3µA at +1.8V
• Pin Compatible with MAX809/MAX810/MAX803/MAX6326/MAX6327/MAX6328/MAX6346/MAX6347/MAX6348, and MAX6711/MAX6712/MAX6713
• Tiny 3-Pin/4-Pin SC70 and 6-Pin µDFN Packages
• AEC-Q100 Qualified, Refer to Ordering Information for the Specific /V Trim Version

应用 Application

• 计算机
• 控制器
• 精确的µP与µC电源监控
• 双电压系统
• 智能仪表
• 便携式电池供电设备

简介

MAX6388属于集成电路（IC）的监控器。由制造生产的MAX6388监控器PMIC 监控器用于监视和/或控制电路中的电压轨，能够连接微控制器以维持一定的功率限值。监控器类型包括电池备用电路、监控器、多电压监控器、电源监控器、稳压器/监控器、复位计时器、定序器、简单复位/上电复位、智能开/关控制器、系统管理器、电压检测器和看门狗电路。