MAX4164中文资料SOT23封装、微功耗、单电源、满摆幅输入/输出运算放大器数据手册ADI规格书

描述 Description

The MAX4162/MAX4163/MAX4164 are single/dual/quad, micropower operational amplifiers that combine an exceptional bandwidth to power consumption ratio with true rail-to-rail inputs and outputs. They consume a mere 25µA quiescent current per amplifier, yet achieve 200kHz gain-bandwidth product and are unity-gain stable while driving any capacitive load. The MAX4162/MAX4163/MAX4164 operate from either a single supply (2.5V to 10V) or dual supplies (±1.25V to ±5V), with an input common-mode voltage range that extends 250mV beyond either supply rail. These amplifiers use a proprietary architecture to achieve a very high input common-mode rejection ratio without the midswing nonlinearities present in other rail-to-rail op amps. This architecture also maintains high open-loop gain and output swing while driving substantial loads.
The combination of excellent bandwidth/power performance, single-supply operation, and miniature footprint makes these op amps ideal for portable equipment and other low-power, single-supply applications. The single MAX4162 is available in 8-pin SO and space-saving 5-pin SOT23 packages. The MAX4163 is available in an 8-pin ultra chip-scale package (UCSP™) and an 8-pin µMAX® or SO package. The MAX4164 is available in a 14-pin SO package.

特性 Features

·UCSP Package (MAX4163)
·1.0pA Typical Input Bias Current
·Single-Supply Operation from 2.5V to 10V
·Input Common-Mode Voltage Range Extends 250mV Beyond Either Supply Rail
·Rail-to-Rail Output Swing
·200kHz Gain-Bandwidth Product
·25µA Quiescent Current per Amplifier
·Excellent CMRR, PSRR, and Gain Linearity
·No Phase Reversal for Overdriven Inputs
·Unity-Gain Stable
·Stable with Any Capacitive Load
·Internally Short-Circuit Protected to Either Rail

应用 Application

·汽车电子
·蜂窝电话
·无绳电话
·血糖表
·GPS方案
·离子探测器
·IP摄像机
·低功耗、低电压设备
·医疗仪器
·面板表
·pH探测器
·便携式设备
·电表
·可编程逻辑控制器(PLC)