MAX4141中文资料330MHz、4x1精密视频多路复用器数据手册ADI规格书

描述 Description

The MAX4141 is a wideband 330MHz, 700V/µs 4x1 multiplexer optimized for high-definition, broadcast-quality, composite (HDTV, NTSC, PAL, SECAM) video switching arrays. The device includes four open-loop buffer amplifiers with a 0.1dB gain flatness of 150MHz, and enable and switch-control logic. The MAX4141 operates from ±5V supplies and features differential phase and gain error of only 0.01°/0.01%. The ultra-low switching glitch (less than 13mV) is positive to avoid confusion with any sync pulses.
Ideal as a building block for large switch arrays, the MAX4141 features a constant, high input impedance and a disable function that puts the output into a high-impedance state and reduces the operating current to only 250µA. The open-loop architecture allows the output to drive capacitive loads without oscillation.
Other key features include -66dB crosstalk (30MHz), -74dB isolation (30MHz), less than 10mV offset voltage, and a 110MHz full-power bandwidth (1.4Vp-p). The MAX4141 is available in a 14-pin narrow SO package.

特性 Features

• 330MHz -3dB Bandwidth
• 0.1dB Gain Flatness of 150MHz
• 700V/µs Slew Rate
• 0.01°/0.01% Differential Phase/Gain
• -66dB Crosstalk and -74dB Isolation at 30MHz
• High-Z Outputs when Disabled
• 3pF Input Capacitance
• Low Switching Glitch
• On-Board Control Logic

应用 Application

• 广播/HDTV级彩色信号多路复用
• 数据采集
• 图形彩色信号切换
• 射频与中频路由
• 电信路由
• 视频由路与交叉点矩阵