MAX3222中文资料具有 +/-15kV ESD 保护的 3V 至 5.5V 双通道 250kbps RS-232 线路驱动器/接收器数据手册TI规格书

描述 Description

The MAX3222 consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/μs driver output slew rate.The MAX3222 can be placed in the power-down mode by setting PWRDOWN low, which draws only 1 μA from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Receiver outputs also can be placed in the high-impedance state by setting EN high.

特性 Features

• RS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM)
• Operates With 3-V to 5.5-V VCC Supply
• Two Drivers and Two Receivers
• External Capacitors: 4 × 0.1 µF
• Alternative High-Speed Pin-Compatible Device (1 Mbps)
• SNx5C3222

简介

MAX3222属于集成电路（IC）的驱动器接收器收发器。由TI制造生产的MAX3222驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。