MAX3221E中文资料具有 +/-15kV IEC-ESD 保护的 3V 至 5.5V 单通道 250kbps RS-232 线路驱动器/接收器数据手册TI规格书

描述 Description

The MAX3221E is a single driver, single receiver RS-232 solution operating from a single VCC supply. The RS-232 pins provide IEC 61000-4-2 ESD protection. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. These devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

Flexible control options for power management are available. Auto-power down disables driver and charge pump when the receiver is disconnected or the remote driver is power down. The drivers can be manually enabled or disabled. INVALID output goes low when receiver input is unconnected or power off.

特性 Features

• ESD protection for RS-232 pins
• ±8 kV (IEC 61000-4-2, Contact discharge)
• Meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards
• Operates up to 250 kbit/s
• Low standby current: 1 µA typical
• Auto-power-down feature automatically disables drivers for power savings
• SN75C3221E and SN65C3221E

简介

MAX3221E属于集成电路（IC）的驱动器接收器收发器。由TI制造生产的MAX3221E驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。