MAX11040开发板套件编程器的评估板-模数转换器（ADC）规格书PDF中文资料

General Description

The MAX11040 is a 24-bit, 4-channel, simultaneous sampling, sigma-delta analog-to-digital converter (ADC). The device allows simultaneous sampling of as many as 32 channels using a built-in cascade feature to synchronize as many as eight devices. The serial interface of the MAX11040 allows reading data from all the cascaded devices using a single command. Four modulators simultaneously convert each fully differential analog input with a programmable data output rate ranging from 0.25ksps to 64ksps. The device achieves 106dB SNR at 16ksps and 117dB SNR at 1ksps. The MAX11040 operates from a single +3V supply. The differential analog input range is ±2.2V when using the internal reference, an external reference is optional. Each input is overvoltage protected up to ±6V without damage. The device uses an internal crystal oscillator or an external source for clock.

特性 Features

♦ Four Fully Differential Simultaneously Sampled Channels

♦ Cascadable for Up to 32 Channels of Simultaneous Sampling

♦ 106dB SNR at 16ksps

♦ 117dB SNR at 1ksps

♦ 0.25 Error Over a 1000:1 Dynamic Range, Processed Over 16.7ms

♦ ±2.2V Full-Scale Input Range

♦ ±6V Overvoltage Protected Inputs

♦ Internal Crystal Oscillator

♦ 2.5V, 50ppm/°C Internal Reference or External Reference

♦ Programmable Output Data Rate

   0.25ksps to 64ksps Range

   0.065 Resolution

♦ Programmable Sampling Phase

   0 to 333µs Delay in 1.33µs Steps

♦ SPI-/QSPI-/MICROWIRE-/DSP-Compatible 4-Wire Serial Interface

♦ Cascadable Interface Allows Control of Up to

   Eight Devices with a Single CS Signal

♦ 3.0V to 3.6V Analog Supply Voltage

♦ 2.7V to VAVDD Digital Supply Voltage

♦ 38-Pin TSSOP Package

Applications

   Power Protection Relay Equipment

   Multiphase Power Systems

   Industrial Data-Acquisition Systems

   Medical Instrumentation