LPC660IMXSLASHNOPB中文资料德州仪器数据手册PDF规格书

1FEATURES

2• Rail-to-rail output swing

• Micropower operation: (1 mW)

• Specified for 100 kΩ and 5 kΩ loads

• High voltage gain: 120 dB

• Low input offset voltage: 3 mV

• Low offset voltage drift: 1.3 μV/°C

• Ultra low input bias current: 2 fA

• Input common-mode includes V−

• Operation range from +5V to +15V

• Low distortion: 0.01% at 1 kHz

• Slew rate: 0.11 V/μs

• Full military temp. range available

APPLICATIONS

• High-impedance buffer

• Precision current-to-voltage converter

• Long-term integrator

• High-impedance preamplifier

• Active filter

• Sample-and-Hold circuit

• Peak detector

DESCRIPTION

The LPC660 CMOS Quad operational amplifier is

ideal for operation from a single supply. It features a

wide range of operating voltages from +5V to +15V

and features rail-to-rail output swing in addition to an

input common-mode range that includes ground.

Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this

design. Input VOS, drift, and broadband noise as well

as voltage gain (into 100 kΩ and 5 kΩ) are all equal

to or better than widely accepted bipolar equivalents,

while the power supply requirement is typically less

than 1 mW.

This chip is built with National's advanced Double-

Poly Silicon-Gate CMOS process.

See the LPC662 datasheet for a Dual CMOS

operational amplifier and LPC661 datasheet for a

single CMOS operational amplifier with these same

features.