LPC2210FBD144

16/32-bit ARM microcontroller with 10-bit ADC and external memory interface

Generaldescription TheLPC2210/2220microcontrollersarebasedona32/16bitARM7TDMI-SCPUwithreal-timeemulationandembeddedtracesupport.Forcriticalcodesizeapplications,thealternative16-bitThumbmodereducescodebymorethan30withminimalperformancepenalty. Features Key

PHI

LPC2210FBD144

16/32-bit ARM microcontrollers; flashless with 64 kB, with 10-bit ADC and external memory interface

Generaldescription TheLPC2210/2220microcontrollersarebasedona32/16bitARM7TDMI-SCPUwithreal-timeemulationandembeddedtracesupport.Forcriticalcodesizeapplications,thealternative16-bitThumbmodereducescodebymorethan30withminimalperformancepenalty. Features Key

PHI

LPC2210FBD144

16/32位Arm®微控制器；不带闪存，具备10位ADC和外部存储器接口; • 16/32-bit Arm7TDMI-S™ microcontroller in a LQFP144 and TFBGA144 package.\n• 16/64 kB on-chip static RAM (LPC2210/2220).\n• Serial bootloader using UART0 provides in-system download and programming capabilities.\n• EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high-speed real-time tracing of instruction execution.\n• Eight channel 10-bit ADC with conversion time as low as 2.44 us. • LPC2210/01 and LPC2220 only: Dedicated result registers for ADC(s) reduce interrupt overhead. The ADC pads are 5 V tolerant when configured for digital I/O function(s).\n• Two 32-bit timers (LPC2220 and LPC2210/01 also external event counters) with four capture and four compare channels, PWM unit (six outputs), Real-Time Clock (RTC), and watchdog.\n• Multiple serial interfaces including two UARTs (16C550), Fast I²C-bus (400 kbit/s) and two SPIs. • LPC2210/01 and LPC2220 only: A Synchronous Serial Port (SSP) with data buffers and variable length transfers can be selected to replace one SPI.\n• LPC2210/01 and LPC2220 only: UART0/1 include fractional baud rate generator, auto-bauding capabilities, and handshake flow-control fully implemented in hardware.\n• Vectored Interrupt Controller (VIC) with configurable priorities and vector addresses.\n• Configurable external memory interface with up to four banks, each up to 16 MB and 8/16/32-bit data width.\n• Up to 76 general purpose pins (5 V tolerant) capable. Up to nine edge/level sensitive external interrupt pins available. • LPC2210/01 and LPC2220 only: Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original device. They also allow for a port pin to be read at any time regardless of its function.\n• 60 MHz (LPC2210) and 75 MHz (LPC2210/01 and LPC2220) maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100 us.\n• On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz and with external oscillator up to 25 MHz.\n• Power saving modes include Idle and Power-down.\n• Processor wake-up from Power-down mode via external interrupt.\n• Individual enable/disable of peripheral functions for power optimization.\n• Dual power supply: • CPU operating voltage range of 1.65 V to 1.95 V (1.8 V +- 0.15 V).\n• I/O power supply range of 3.0 V to 3.6 V (3.3 V +- 10 pct) with 5 V tolerant I/O pads. 16/32-bit ARM7TDMI-S™ processor.\n;

The LPC2210/2220 microcontrollers are based on a 16/32-bit Arm7TDMI-S™ CPU with real-time emulation and embedded trace support. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.\nWith their 144-pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, PWM channels, and up to nine external interrupt pins these microcontrollers are particularly suitable for industrial control, medical systems, access control and point-of-sale. The LPC2210/2220 can provide up to 76 GPIOs depending on bus configuration. With a wide range of serial communications interfaces, it is also very well suited for communication gateways, protocol converters and embedded soft modems as well as many other general-purpose applications.\nRemark:Throughout the data sheet, the term LPC2210/2220 will apply to devices with and without the /01 suffix. The /01 suffix will be used to differentiate LPC2210 devices only when necessary.\n

恩XP

LPC2210FBD144

16/32-bit ARM microcontrollers; flashless, with 10-bit ADC and external memory interface

ETC

LPC2210FBD144/01

16/32-bit ARM microcontrollers; flashless, with 10-bit ADC and external memory interface

ETC

LPC2210FBD144SLASH01

16/32-bit ARM microcontrollers; flashless, with 10-bit ADC and external memory interface

ETC