LPC1317FBD48中文资料基于ARM® Cortex®-M3内核的入门级32位微控制器(MCU)数据手册恩XP规格书

描述 Description

The LPC1317FBD48 is an Arm Cortex-M3 based microcontroller for embedded applications featuring a high level of integration and low power consumption. The Arm Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The LPC1317FBD48 operates at CPU frequencies of up to 72 MHz. The Arm Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The Arm Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching.

特性 Features

• Arm Cortex-M3 r2p1 processor, running at frequencies of up to 72 MHz
• Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC).
• Non Maskable Interrupt (NMI) input selectable from several input sources
• System tick timer
• 64 kB on-chip flash program memory with a 256 byte page erase function
• In-System Programming (ISP) and In-Application Programming (IAP)
• 4 kB on-chip EEPROM data memory with on-chip API support
• 10 kB SRAM data memory
• 16 kB boot ROM with API support
• Standard JTAG test interface for BSDL
• Serial Wire Debug
• Support for ETM Arm Cortex-M3 debug time stamping
• 40 General Purpose I/O (GPIO) pins
• 8 GPIO pins can be selected as edge and level sensitive interrupt sources
• Two GPIO grouped interrupt modules
• High-current source output driver (20 mA) on one pin (P0_7)
• High-current sink driver (20 mA) on true open-drain pins (P0_4 and P0_5)
• Four general purpose counter/timers
• Programmable Windowed WatchDog Timer (WWDT)
• Repetitive Interrupt Timer (RI Timer)
• 12-bit ADC with eight input channels and sampling rates of up to 500 kSamples/s
• USART with fractional baud rate generation
• Two SSP controllers with FIFO and multi-protocol capabilities
• I2C-bus interface supporting the full I2C-bus specification and Fast-mode Plus
• Crystal Oscillator with an operating range of 1 MHz to 25 MHz
• 12 MHz high-frequency Internal RC oscillator (IRC) trimmed to 1 % accuracy
• Internal low-power, low-frequency WatchDog Oscillator (WDO)
• PLL allows CPU operation up to the maximum CPU rate
• Clock output function with divider
• Four reduced power modes
• Power profiles residing in boot ROM
• Processor wake-up
• Integrated PMU (Power Management Unit)
• Power-On Reset (POR)
• Brownout detect with four separate thresholds for interrupt and forced reset
• Unique device serial number for identification
• Single 3.3 V power supply (2.0 V to 3.6 V)

应用 Application

消费电子外设
医疗设备
工业控制
手持式扫描仪
USB音频设备