LPC1315FBD48数据手册恩XP中文资料规格书

描述 Description

The LPC1315FBD48 is an Arm Cortex-M3 based microcontroller for embedded applications featuring a high level of integration and low power consumption. The Arm Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The LPC1315FBD48 operates at CPU frequencies of up to 72 MHz. The Arm Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The Arm Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching.

特性 Features

Arm Cortex-M3 r2p1 processor, running at frequencies of up to 72 MHz
Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC).
Non Maskable Interrupt (NMI) input selectable from several input sources
System tick timer
32 kB on-chip flash program memory with a 256 byte page erase function
In-System Programming (ISP) and In-Application Programming (IAP)
2 kB on-chip EEPROM data memory with on-chip API support
8 kB SRAM data memory
16 kB boot ROM with API support
Standard JTAG test interface for BSDL
Serial Wire Debug
Support for ETM Arm Cortex-M3 debug time stamping
40 General Purpose I/O (GPIO) pins
8 GPIO pins can be selected as edge and level sensitive interrupt sources
Two GPIO grouped interrupt modules
High-current source output driver (20 mA) on one pin (P0_7)
High-current sink driver (20 mA) on true open-drain pins (P0_4 and P0_5)
Four general purpose counter/timers
Programmable Windowed WatchDog Timer (WWDT)
Repetitive Interrupt Timer (RI Timer)
12-bit ADC with eight input channels and sampling rates of up to 500 kSamples/s
USART with fractional baud rate generation
Two SSP controllers with FIFO and multi-protocol capabilities
I2C-bus interface supporting the full I2C-bus specification and Fast-mode Plus
Crystal Oscillator with an operating range of 1 MHz to 25 MHz
12 MHz high-frequency Internal RC oscillator (IRC) trimmed to 1 % accuracy
Internal low-power, low-frequency WatchDog Oscillator (WDO)
PLL allows CPU operation up to the maximum CPU rate
Clock output function with divider
Four reduced power modes
Power profiles residing in boot ROM
Processor wake-up
Integrated PMU (Power Management Unit)
Power-On Reset (POR)
Brownout detect with four separate thresholds for interrupt and forced reset
Unique device serial number for identification
Single 3.3 V power supply (2.0 V to 3.6 V)

应用 Application

消费电子外设
医疗设备
工业控制
手持式扫描仪
USB音频设备