LP8727中文资料具有集成 28V 线性充电器的微型到迷你 USB 接口数据手册TI规格书

描述 Description

The LP8727 is designed to provide automatic multiplexing switches between Micro/Mini USB connector and USB, UART and Audio paths in cellular phone applications. It also contains a single-input Li-Ion battery charger and an overvoltage-protected LDO. Programming is handled via an I2C-compatible Serial Interface allowing control of charger, multiplexing switches, and reading status information of the device.
The multiplexing switches on USB and UART support high-speed USB, and Audio inputs can be driven to negative voltage rail. The LP8727 is compatible with USB charging specifications rev 1.1 from USB IF.
The Li-Ion charger requires few external components and integrates the power FET. Charging is thermally regulated to obtain the most efficient charging rate for a given ambient temperature. It has Overvoltage Protection (OVP) circuit at the charger input protects the PMU from input voltages up to +28V, eliminating the need for any external protection circuitry.
An overvoltage-protected LDO which can supply up to 50 mA is designed for powering up a low-voltage USB transceiver or waking up a PMU (Power Management Unit) when an external power source (either USB VBUS or wall adapter) is connected to the USB connector.
The LP8727 PMU is available in 25-bump 0.4 mm pitch thin DSBGA package (2.015 mm x 2.015 mm).

特性 Features

• USB Multiplexing Switches
• Negative Voltage Rail on Audio Inputs
• Compatible with USB Charging Specification Rev. 1.1
• Low-Power MIC Standby Mode
• Linear Charge with Single Input
• High-Current Mode for Production Test
• Over-Voltage Protected LDO for USB Transceivers and PMU Wakeup
• Interrupt Request to Reduce SW Polling
• SEND / END Button Detection
• OVLO / UVLO on VBUS
• Thermal Shutdown Protection
• 25-Bump 0.4 mm Pitch Thin DSBGA Package

简介

LP8727属于集成电路（IC）的专用。由TI制造生产的LP8727专用该系列产品可提供所需的功能，用以将信息源/信宿连到各种复杂或范围狭窄应用中的传感器、变送器、致动器、传输介质或其他此类端点。例如，汽车安全气囊驱动器、车身控制和信息娱乐总线、自适应电缆均衡器、智能卡等等。