LP8553中文资料适用于笔记本电脑的四通道高效 LED 背光驱动器，具有 3.3V PWM 逻辑电平数据手册TI规格书

描述 Description

The LP8553 is a white LED driver with integrated boost converter. It has four adjustable current sinks which can be controlled by PWM input or with I2C-compatible serial interface.The boost converter has adaptive output-voltage control based on the LED driver voltages. This feature minimizes the power consumption by adjusting the voltage to lowest sufficient level in all conditions.LED outputs have 8-bit current resolution and up to 13-bit PWM resolution with additional 1-3 bit dithering to achieve smooth and precise brightness control. Proprietary Phase Shift PWM control is used for LED outputs to reduce peak current from the boost converter, thus making the boost capacitors smaller. The Phase Shifting scheme also eliminates audible noise.Automatic PWM dimming at lower brightness values and current dimming at higher brightness values can be used to improve the optical efficiency.Internal EEPROM is used for storing the configuration data. This makes it possible to have minimum external component count and make the solution very small.LP8553 has safety features which make it possible to detect LED outputs with open or short fault. Low input voltage and boost over-current conditions are also monitored, and the chip is turned off when these events occur. Thermal de-rating function prevents overheating of the device by reducing backlight brightness when set temperature has been reached.LP8553 is available in TI’s DSBGA 25-bump package.

特性 Features

• High-Voltage DC/DC Boost Converter with Integrated FET with Four Switching Frequency Options: 156/312/625/1250 kHz
• 2.7V to 22V Input Voltage Range to Support 1x…5x Cell Li-Ion Batteries
• Programmable PWM Resolution
• 8 to 13 True Bit (Steady State)
• Additional 1 to 3 Bits Using Dithering During Brightness Changes

• I2C and PWM Brightness Control
• Automatic PWM & Current Dimming for Improved Efficiency
• PWM Output Frequency and LED Current Set Through Resistors
• Optional Synchronization to Display VSYNC Signal
• 4 LED Outputs with LED Fault (Short/Open) Detection
• Low Input Voltage, Over-Temperature, Over-Current Detection and Shutdown
• Minimum Number of External Components
• DSBGA 25-Bump Package, 2.466 × 2.466 × 0.6 mm

简介

LP8553属于集成电路（IC）的LED驱动器。由TI制造生产的LP8553LED 驱动器器件属于 LED 驱动器电源管理集成电路 (PMIC) 系列，可通过标称固定电压的电源为负载（通常为发光二极管）提供电流，并且电流可控。它与用于电压调节的类似产品的主要区别在于，这类器件提供较低的反馈电压（以提高系统能效），而且通常可对器件工作点进行外部控制，可在照明应用中用于实现调光功能。