LP28057中文资料1.2A Single-chip Li-ion Charge with Protection of Reverse Connection of Battery数据手册LPSemi规格书

描述 Description

The LP28057 is a complete constant-current/ constant- voltage linear charger for single cell lithium-ion batteries. Its ESOP-8 package and low external component count make the LP28057 ideally suited for portable applications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be ISET rammed externally with a single resistor. The LP28057 automatically terminates the charge cycle when the charge current drops to 1/10th the ISET rammed value after the final float voltage is reached. When the input supply is removed, the LP28057 automatically enters a low current state, dropping the battery drain current to less than 1μA. The LP28057 can be put into shutdown mode, reducing the supply current to 1μA. Other features include charge current monitor, under voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.

特性 Features

· input voltage up to 28V
· input Over Voltage Protection：7V
· Short-circuit protection
· Programmable Charge Current Up to 1000mA
· < 1μA Battery Reverse Current
· Protection of Reverse Connection of Battery
· No MOSFET, Sense Resistor or Blocking Diode Required
· Constant-Current/Constant-Voltage Operation with
·Thermal Regulation to Maximize Charge Rate Without
·Risk of Overheating
· ESOP8 Package
· RoHS Compliant and 100% Lead (Pb)-Free

应用 Application

· Portable Media Players/Game
· Power Bank
· Bluetooth Applications
· PDA/MID