LP28021中文资料1.0A Single-chip Li-ion and Li-POL Chargerwith OVP Protection数据手册LPSemi规格书

描述 Description

The LP28021/A is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its TDFN-10 package and low external component count make the LP28021/A ideally suited for portable applications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be rammed externally with a single resistor(RIBAT). The LP28021 automatically terminates the charge cycle when the charge current drops to 1/10th the RIBAT rammed value after the final float voltage is reached. When the input supply is removed, the LP28021/A automatically enters a low current state, dropping the battery drain current to less than 1μA. Other features include charge current monitor, under voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.

特性 Features

· Very Low Power Dissipation
· Input Voltage: 4V~36V
· Input OVP: 6.1V
· Protection of Reverse Connection of Battery
· Programmable Charge Current Up to 1000mA
· No MOSFET, Sense Resistor or Blocking Diode Required
· Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating
· 1μA Leakage Current in Shutdown
· Drainage Charge Current Thermal Regulation Status Outputs for LED or System Interface
· Indicates Charge and Fault Conditions
· Consumption Available in TDFN-10 Package
· RoHS Compliant and 100% Lead (Pb)-Free

应用 Application

· Portable Media Players/Game
· Power Bank
· PDA/MID
· Bluetooth Applications