LMR60420-Q1中文资料具有低 Iq 和高效率且输出电容极低的 36V 2A 同步降压转换器数据手册TI规格书

描述 Description

The LMR60420-Q1 is a 3V to 36V (42V transient), 2A, synchronous buck converter designed for automotive applications. The LMR60420-Q1 offers variants with spread spectrum in an ultra-compact, 2.5mm × 2mm, HotRod QFN-9 package with wettable flanks available, which reduces inductance and achieves low (EMI) performance to facilitate qualification of automotive and other noise-sensitive designs. All device variants are capable of output voltages ranging from 1V to 20V by including a resistor divider between the output voltage node, feedback, and ground. Each variant of the device is also capable of delivering a fixed output voltage by connecting the output voltage node directly to the feedback pin. The Device Comparison Table provides details on the fixed output voltage options. The current-mode control architecture with 30ns minimum on-time allows high conversion ratios at high frequencies, easy loop compensation, fast transient response, and excellent load and line regulation. An open drain power-good output facilitates power sequencing requirements. The MODE/SYNC pin of the LMR60420-Q1 allows the user to select between modes of operation. Forced pulse width modulation (FPWM) mode results in constant switching frequency across load while auto mode allows for seamless transitions between pulse width modulation (PWM) and pulse frequency modulation (PFM) switching. In auto mode, the LMR60420-Q1 consumes only 5µA of quiescent current, which makes sure of high efficiency at all loads. Few external components are needed allowing for compact PCB layout. The LMR60420-Q1 is a part of a family of pin compatible devices ranging in current levels from 0.6A to 6A.

特性 Features

AEC-Q100 qualified for automotive applications

Device temperature grade 1: –40°C to 125°C ambient operating temperature range



Functional Safety-Capable

Documentation available to aid functional safety system design



Wide operating input voltage: 3V to 36V (42V absolute maximum)

Ultra-low quiescent current

Shutdown current: 0.65µA

No load standby current: 5µA



Pin programmable output voltage options available in fixed 3.3V/ADJ and 5V/ADJ

Adjustable output voltage range from 1V to 20V



Low minimum tON (30ns typical)

Designed for low electromagnetic interference (EMI) requirements:

Facilitates CISPR 25 class 5 compliance

Low inductance HotRod™ QFN package

Spread spectrum options available



Programmable switching frequency from200kHz – 2.2MHz

FPWM, PFM, or external frequency synchronization available

Designed for scalable power supplies

Pin compatible with LMR60406-Q1, LMR60410-Q1, LMR60430-Q1, and LMR60440-Q1



Power-Good output for power sequencing