LMK5C33216RGCT集成电路（IC）的时钟发生器PLL频率合成器规格书PDF中文资料

LMK5C33216RGCT属于集成电路（IC）的时钟发生器PLL频率合成器。由德州仪器制造生产的LMK5C33216RGCT时钟发生器，PLL，频率合成器时钟发生器、PLL 和频率合成器集成电路 (IC) 可为逻辑器件提供参考信号的稳定定时脉冲，这些器件包括计算机、微控制器、数据通信系统和图形/视频发生器。这些集成电路可能包括缓冲器、驱动器、分频器、倍频器、多路复用器、合成器、扇出分配器和预分频器。

1 Features

• BAW APLL with 40 fs RMS jitter at 491.52 MHz

• Three high-performance digital phase locked loops

(DPLLs) with paired analog phase locked loops

(APLLs)

– Programmable DPLL loop bandwidth from 0.01

Hz to 4 kHz

– -116 dBc/Hz at 100 Hz offset at 122.88 MHz

DPLL TDC noise with ≥ 20 MHz TDC rate

• Two differential or single-ended DPLL inputs

– 1 Hz to 800 MHz differential

– Hitless switching with phase cancellation and/or

phase slew control

– Priority based reference selection

• 16 outputs with programmable format

– 1000 MHz LVPECL/LVDS/HSDS

– 3000 MHz CML on OUT4 and OUT6

– 200 MHz LVCMOS on OUT0 and OUT1

• Single 3.3-V supply with internal LDOs

• I2C or 3-wire/4-wire SPI interface

• Requires single XO/TCXO/OCXO

• 40-bit DPLL or APLL DCO, < 1 ppt

• Holdover with phase build out upon exit

• Zero delay mode with programmable delay

• User programmable EEPROM

• Supports 105 °C PCB temperature

2 Applications

• 4G and 5G Wireless Networks

• Base Band Unit (BBU)

• Active Antenna Unit (AAU)

• Remote Radio Unit (RRU)

• Network Switch (5G HUB)

• Small Cell

3 Description

The LMK5C33216 is a high-performance network

clock generator, synchronizer, and jitter attenuator

with advanced reference clock selection and

hitless switching capabilities designed to meet

the stringent requirements of communications

infrastructure applications.

The LMK5C33216 integrates 3 DPLLs with

programmable loop bandwidth and no external loop

filters, maximizing flexibility and ease of use. Each

DPLL phase locks a paired APLL to a DPLL reference

input. The APLL reference determines the long term

frequency accuracy.

The 3 APLLs may operate independent of their paired

DPLL and be cascaded from another APLL to provide

programmable frequency translation. APLL3 features

ultra high performance PLL with TI's proprietary

Bulk Acoustic Wave (BAW) VCBO technology and

can generate output clocks with 40-fs RMS jitter

independent of the jitter and frequency of the XO and

reference inputs. APLL1 and APLL2 provide options

for additional frequency domains.

The device is fully programmable through I2C or SPI

interface. The onboard EEPROM can be used to

customize system start-up clocks.