LMK1D1216集成电路（IC）的时钟缓冲器驱动器规格书PDF中文资料

LMK1D1216属于集成电路（IC）的时钟缓冲器驱动器。由德州仪器制造生产的LMK1D1216时钟缓冲器，驱动器时钟缓冲器和驱动器集成电路产品族中的产品用于帮助信号在系统中传输，常用作频率/时间参考信号，以同步系统内的活动。尽管这些器件最常用到的功能就是缓冲（即，为使信号不受驱动负载的影响而从某个信号源复制信号），但是该产品族中的某些器件还能执行其他功能，例如选择性改变缓冲信号路径、按某个整数值分割信号频率，或进行所用电信号格式转换。

1 Features

• High-performance LVDS clock buffer family with 2

inputs and 4 outputs (2:4)

• Output frequency up to 2 GHz

• Hardware pins for individual output enable/disable

• Supply voltage: 1.8 V / 2.5 V / 3.3 V ± 5%

• Low additive jitter: < 60 fs rms maximum in 12 kHz

to 20 MHz at 156.25 MHz

– Very low phase noise floor: -164 dBc/Hz

(typical)

• Very low propagation delay: < 575 ps maximum

• Output skew: 20 ps maximum

• Fail-safe inputs

• Universal inputs accept LVDS, LVPECL, LVCMOS,

HCSL and CML

• LVDS reference voltage, VAC_REF, available for

capacitive-coupled inputs

• Industrial temperature range: –40°C to 105°C

• Packages available:

– 5-mm × 5-mm, 28-pin VQFN (RHD)

2 Applications

• Telecommunications and networking

• Medical imaging

• Test and measurement

• Wireless infrastructure

• Pro audio, video and signage

3 Description

The LMK1D1204P clock buffer distributes one of two

selectable clock inputs (IN0 and IN1) to 4 pairs of

differential LVDS clock outputs (OUT0 through OUT3)

with minimum skew for clock distribution. The inputs

can be either LVDS, LVPECL, LVCMOS, HCSL, or

CML.

The LMK1D1204P is specifically designed for driving

50-Ω transmission lines. When driving inputs in

single-ended mode, apply the appropriate bias

voltage to the unused negative input pin (see Figure

9-6). The IN_SEL pin selects the input which is routed

to the outputs. The part supports a fail-safe input

function. The device further incorporates an input

hysteresis which prevents random oscillation of the

outputs in the absence of an input signal.

Each LVDS differential output is enabled by setting

the corresponding OEx pin to a logic high 1. If this

pin is set to a logic low 0, the output is disabled in a

high Z state resulting in reduced power consumption.

The device operates in a 1.8-V, 2.5-V, or 3.3-V

supply environment and is characterized from –40°C

to 105°C (ambient temperature).