LM5035C中文资料具有集成半桥和 5V SyncFET 驱动输出的 PWM 控制器，具有增强的最大占空比数据手册TI规格书

描述 Description

The LM5035C half-bridge controller and gate driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feedforward.The LM5035C is a functional variant of the LM5035B half-bridge PWM controller. The amplitude of the SR1 and SR2 waveforms are 5 V instead of the VCC level. Also, the soft-stop function is disabled in the LM5035C.The LM5035, LM5035A, LM5035B, and LM5035C include a floating high-side gate driver, which is capable of operating with supply voltages up to 105 V. Both the high-side and low-side gate drivers are capable of 2-A peak. An internal high-voltage start-up regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2 MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection. The differences between LM5035, LM5035A, LM5035B, and LM5035C are summarized in the Device Comparison Table.

特性 Features

• 105-V and 2-A Half-Bridge Gate Drivers
• Synchronous Rectifier Control Outputs With Programmable Delays
• Reduced Dead Time Between High and Low-Side Drive for Higher Maximum Duty Cycle.
• High Voltage (105 V) Start-Up Regulator
• Voltage Mode Control With Line Feedforward and Volt Second Limiting
• Resistor Programmed, 2-MHz Capable Oscillator
• Programmable Line Undervoltage Lockout and Overvoltage Protection
• Internal Thermal Shutdown Protection
• Adjustable Soft Start
• Versatile Dual Mode Overcurrent Protection With Hiccup Delay Timer
• Cycle-by-Cycle Overcurrent Protection
• Direct Opto-coupler Interface
• Logic Level Synchronous Rectifier Drives
• 5-V Reference Output
• Packages:
• HTSSOP-20 (Thermally Enhanced)
• WQFN-24 (4mm × 5mm)

简介

LM5035C属于集成电路（IC）的DC-DC开关控制器。由TI制造生产的LM5035CDC-DC 开关控制器PMIC（电源管理集成电路）DC 到 DC 开关式控制器是用于高效率电路的稳压 IC，其配置为生成高于（突升或步升）或低于（突降或步降）输入电源的输出电源电压。其他拓扑结构可能包括：降压-升压、反激、正激、Cuk、SEPIC、全桥、半桥和推挽式。这些器件不同于需要最小电压并“烧尽”多余电压的线性稳压器。