1 to 2.3W 2-Channel af Power Amp

Features • Has two channels that can be used for either stereo or bridge amplifier. • High outputs : LA4192 provides 2.3W per channel for 2 channel stereo connected at VCC=9V, RL=4Ω, or 4.7W bridge amplifier (for RL=8Ω). • Voltage gain is variable by externally connected feedback resisto

文件：355.11 Kbytes 页数：11 Pages

SANYO

三洋

2-CHANNEL AF POWER AMP FOR TAPE RECORDER RADIO

LA4190, LA4192 2-CHANNEL AF POWER AMP. FOR TAPE RECORDER, RADIO LA4260, LA4261 2.5 TO 3.5W 2-CHANNEL AF POWER AMP LA4265 TV SOUND OUTPUT AMPLIFIER LA4270 6.5W DUAL-CHANNEL AF POWER AMP

文件：49.95 Kbytes 页数：1 Pages

SANYO

三洋

1 to 2.3W 2-Channel of Power Amplifier

• Has two channels that can be used for either stereo or bridge amplifier.\n• High outputs : LA4192 provides 2.3W per channel for 2 channel stereo connected at VCC=9V,  RL=4Ω, or 4.7W bridge amplifier (for RL=8Ω).\n• Voltage gain is variable by externally connected feedback resistors :\nFor 2-channe;

ONSEMI

安森美半导体

OPAx192 36-V, Precision, Rail-to-Rail Input/Output, Low Offset Voltage,Low Input Bias Current Op Amp with e-trim?

文件：3.06264 Mbytes 页数：52 Pages

TI

德州仪器

OPAx192 36-V, Precision, Rail-to-Rail Input/Output, Low Offset Voltage, Low Input Bias Current Op Amp with e-trim™

1 Features 1• Low Offset Voltage: ±5 μV • Low Offset Voltage Drift: ±0.2 μV/°C • Low Noise: 5.5 nV/√Hz at 1 kHz • High Common-Mode Rejection: 140 dB • Low Bias Current: ±5 pA • Rail-to-Rail Input and Output • Wide Bandwidth: 10 MHz GBW • High Slew Rate: 20 V/μs • Low Quiescent Current: 1

文件：3.22787 Mbytes 页数：61 Pages

TI

德州仪器

Low Input Bias Current Op Amp

文件：3.20794 Mbytes 页数：52 Pages

TI

德州仪器