JN5179数据手册恩XP中文资料规格书

描述 Description

The JN5179 device is an ultra-low-power, high-performance wireless microcontroller, optimized as a platform for ZigBee 3.0 applications in Smart Home and Smart Lighting networks. It features an Arm® Cortex®-M3 processor with debug and programmable clock speeds. The JN5179 device has 512 kB of embedded Flash memory as well as 32 kB of RAM and 4 kB of EEPROM. The embedded Flash can support \"Over-The-Air\" firmware updates. The device also includes a 2.4 GHz \"IEEE802.15.4 compliant\" transceiver and a comprehensive mix of on-chip analog and digital peripherals.
The radio transmit power is configurable up to +10 dBm output. The very-low receive operating current (down to 12.7 mA in normal operation and 0.6 µA in sleep mode) results in long battery life, allowing operation directly from a coin cell. Through its power-saving modes, the device is therefore ideal for battery-powered nodes. The on-chip peripherals include a fail-safe I2C-bus, SPI-bus ports (both master and slave) and a 6-channel analog-to-digital converter, directly supporting a wide range of applications without the need for extra hardware.
For support documentation, please click here.

特性 Features

Benefits
• Very low current solution for long battery life: over 10 years
• Very low receive current for low standby power of ‘receiver always on’ nodes
• Integrated power amplifier for long range and robust communication
• Large embedded Flash memory to enable Over-The-Air (OTA) firmware updates without external Flash memory
• Single-chip device to run communication stack and application
• Supports multiple network stacks
• Peripherals customized for lighting applications
• System BOM is low in component count and cost
• Flexible sensor interfacing
• Package
• 6 x 6 mm HVQFN40, 0.5 mm pitch
• lead-free and RoHS compliant
• Temperature range: -40 °C to +125 °C
Radio Features
• 2.4 GHz IEEE802.15.4 compliant
• Receive current 14.8 mA, in low-power receive mode 12.7 mA
• Receiver sensitivity -96 dBm
• Configurable transmit power for reduced current consumption, for example:
• 10 dBm, 22.5 mA
• 8.5 dBm, 19.6 mA
• 3 dBm, 14mA
• Radio link budget 106 dB
• Maximum input level of +10 dBm
• Compensation for temperature drift of crystal oscillator frequency
• 2.0 V to 3.6 V battery operation
• Antenna diversity (Auto RX)
• Integrated ultra-low-power sleep oscillator (0.6 µA)
• 100 nA deep sleep current with wake-up from external event
• 128-bit AES security processor
• MAC accelerator with packet formatting, CRCs, address check, auto-acks, timers
Microcontroller Features
• Cortex-M3 CPU with debug support
• 512kB Flash, 32kB RAM, 4kB EEPROM
• OTA firmware upgrade capability
• 32 MHz clock selectable down to 1 MHz for low-power operation
• Dual PAN ID support
• Fail-safe I2C-bus interface, operates as either master or slave
• 8 Timers (6 x PWM and 2 timer/counters)
• 2 low-power sleep counters
• 2 UARTs, one with flow control
• SPI-bus master and slave port, 2 simultaneous selects
• Variable instruction width for high coding efficiency
• Multi-stage instruction pipeline
• Data EEPROM with guaranteed 100k write operations
• Supply voltage monitor with 8 programmable thresholds
• Battery voltage and temperature sensors
• 6-input 10-bit ADC
• Analog comparator
• Digital monitor for ADC
• Watchdog timer and POR
• Low-power modes controller
• Up to 18 Digital IO (DIO) and 2 digital outputs pins

应用 Application

安全可靠的低功率无线应用
Thread
ZigBee 3.0照明与居住
ZigBee家庭自动化
ZigBee光链路
电能采集 - 例如自供电照明开关
玩具和游戏外设