JN5169数据手册恩XP中文资料规格书

描述 Description

The JN5169 is an ultra low power, high performance wireless microcontroller suitable forZigBee applications. It features 512 kB embedded Flash, 32 kB RAM and 4 kB EEPROMmemory, allowing OTA upgrade capability without external memory. The 32-bit RISCprocessor offers high coding efficiency through variable width instructions, amulti-stage instruction pipeline and low-power operation with programmable clock speeds.It also includes a 2.4 GHz IEEE802.15.4 compliant transceiver and a comprehensive mix ofanalog and digital peripherals. The best in class RX operating current (down to 13 mAand with a 0.7 μA sleep timer mode) gives excellent battery life allowing operationdirect from a coin cell.
The peripherals support a wide range of applications. They include a 2-wire compatibleI²C-bus and SPI-bus which can operate as either master or slave, a6-channel ADC with a battery monitor and a temperature sensor. It can support a largeswitch matrix of up to 100 elements, or alternatively a 40-key capacitive touch pad.
For support documentation, please click here.

特性 Features

Benefits
• Single chip device to run stack and application
• Very low current solution for long battery life; over 10 years
• Very low RX current for low standby power of mains powered nodes
• Integrated power amplifier for long range and robust communication
• High tolerance to interference from other 2.4 GHz radio sources
• Supports multiple network stacks
• Highly featured 32-bit RISC CPU for high performance and low power
• Large embedded Flash memory to enable over-the-air firmware updates withoutexternal Flash memory
• System BOM is low in component count and cost
• Flexible sensor interfacing options
• Very thin quad flat 6 × 6 mm, 40 terminal package; lead-free and RoHScompliant
• Temperature range: -40 °C to +125 °C
Features: radio
• 2.4 GHz IEEE802.15.4 compliant
• RX current 14.7 mA, in low power receive mode 13 mA
• Receiver sensitivity -96 dBm
• Configurable transmit power, for example:
• 10 dBm, 23.3 mA
• 8.5 dBm, 19.6 mA
• 3 dBm, 14 mA
• Radio link budget 106 dB
• Maximum input level of +10 dBm
• Compensation for temperature drift of crystal oscillator frequency
• 128-bit AES security processor
• MAC accelerator with packet formatting, CRCs, address check, auto-acks,timers
• Integrated ultra low-power RC sleep oscillator (0.7 μA)
• 2.0 V to 3.6 V battery operation
• Deep sleep current 50 nA (wake-up from IO)
• < 0.15 $ external component cost
• Antenna diversity (Auto RX)
Features: microcontroller
• 32-bit RISC CPU; 1 MHz to 32 MHz clock speed
• Variable instruction width for high coding efficiency
• Multi-stage instruction pipeline
• 512 kB Flash
• 32 kB RAM
• 4 kB EEPROM
• Data EEPROM with guaranteed 100 k write operations
• ZigBee PRO stack with Home Automation, Light Link and Smart Energyprofiles
• 2-wire I²C-bus compatible serial interface; can operate as eithermaster or slave
• 5 × PWM (4 timers, 1 timer/counter)
• 2 low-power sleep counters
• 2 UARTs
• SPI-bus master and slave port, 3 selects
• Supply voltage monitor with 8 programmable thresholds
• 6-input 10-bit ADC, comparator
• Battery and temperature sensors
• Watchdog and Supply Voltage Monitor (SVM)
• Up to 20 Digital IO (DIO) pins

应用 Application

安全可靠的低功率无线应用
ZigBee Smart Energy networks
ZigBee Light Link网络
ZigBee Home Automation networks
玩具和游戏外设
电能采集 - 例如自供电照明开关