The IXBD4410/IXBD4411 ISOSMART chipset is designed to control the gates of two Power MOSFETs or Power IGBTs that are connected in a half bridge (phase-leg) configuration for driving multiple-phase motors, or used in applications that require half-bridge power circuits. The IXBD4410/IXBD4411 is a full-feature chipset consisting of two 16-Pin DIP or SO devices interfaced and isolated by two small-signal ferrite pulse transformers. The small-signal transformers provide greater than 1200 V isolation.

Features

• 1200 V or greater low-to-high side isolation.

• Drives Power Systems Operating on up to 575 V AC mains

• dv/dt immunity of greater than ±50V/ns

• Proprietary low-to-high side level translation and communication

• On-chip negative gate-drive supply to ensure Power MOSFET or IGBT turn-off and to prevent gate noise interference

• 5 V logic compatible HCMOS inputs with hysteresis

• Available in either the 16-Pin DIP or the 16-Pin wide-body, small-outline plastic package

• 20 ns switching time with 1000 pF load; 100 ns switching time with 10,000 pF load

• 100 ns propagation delay time

• 2 A peak output drive capability

• Self shut-down of output in response to over-current or short-circuit

• Under-voltage and over-voltage VDD lockout protection

• Protection from cross conduction of the half bridge

• Logic compatible fault indication from both low and high-side driver

Applications

• 1- or 3-Phase Motor Controls

• Switch Mode Power Supplies (SMPS)

• Uninterruptible Power Supplies (UPS)

• Induction Heating and Welding Systems

• Switching Amplifiers

• General Power Conversion Circuits

IXBD4410P属于集成电路（IC） > 栅极驱动器。IXYS Integrated Circuits Division制造生产的IXBD4410P栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。