ISO1042DWVR集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

ISO1042DWVR属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的ISO1042DWVR驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

1• Meets the ISO 11898-2:2016 physical layer

standard

• Supports classic CAN up to 1 Mbps and FD

(Flexible Data Rate) up to 5 Mbps

• Low loop delay: 152 ns

• Protection features

– DC bus fault protection voltage: ±70 V

– HBM ESD tolerance on bus pins: ±16 kV

– Driver Dominant Time Out (TXD DTO)

– Undervoltage protection on VCC1 and VCC2

• Common-Mode Voltage Range: ±30 V

• Ideal passive, high impedance bus terminals when

unpowered

• High CMTI: 100 kV/μs

• VCC1 voltage range: 1.71 V to 5.5 V

– Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic

interface to the CAN controller

• VCC2 Voltage Range: 4.5 V to 5.5 V

• Robust Electromagnetic Compatibility (EMC)

– System-level ESD, EFT, and surge immunity

– Low emissions

• Ambient Temperature Range: –40°C to +125°C

• 16-SOIC and 8-SOIC package options

• Automotive version available: ISO1042-Q1

• Safety-related certifications:

– 7071-VPK VIOTM and 1500-VPK VIORM

(Reinforced and Basic Options) per DIN VDE

V 0884-11:2017-01

– 5000-VRMS Isolation for 1 Minute per UL 1577

– IEC 60950-1, IEC 60601-1 and EN 61010-1

certifications

– CQC, TUV and CSA certifications

2 Applications

• AC and servo drives

• Solar inverters

• PLC and DCS communication modules

• Elevators and escalators

• Industrial power supplies

• Battery charging and management

3 Description

The ISO1042 device is a galvanically-isolated

controller area network (CAN) transceiver that meets

the specifications of the ISO11898-2 (2016) standard.

The ISO1042 device offers ±70-V DC bus fault

protection and ±30-V common-mode voltage range.

The device supports up to 5-Mbps data rate in CAN

FD mode allowing much faster transfer of payload

compared to classic CAN. This device uses a silicon

dioxide (SiO2) insulation barrier with a withstand

voltage of 5000 VRMS and a working voltage of 1060

VRMS. Electromagnetic compatibility has been

significantly enhanced to enable system-level ESD,

EFT, surge, and emissions compliance. Used in

conjunction with isolated power supplies, the device

protects against high voltage, and prevents noise

currents from the bus from entering the local ground.

The ISO1042 device is available for both basic and

reinforced isolation (see Reinforced and Basic

Isolation Options). The ISO1042 device supports a

wide ambient temperature range of –40°C to +125°C.

The device is available in the SOIC-16 (DW) package

and a smaller SOIC-8 (DWV) package.