ISO1042DWR.A中文资料德州仪器数据手册PDF规格书

1 Features

1• Meets the ISO 11898-2:2016 physical layer

standard

• Supports classic CAN up to 1 Mbps and FD

(Flexible Data Rate) up to 5 Mbps

• Low loop delay: 152 ns

• Protection features

– DC bus fault protection voltage: ±70 V

– HBM ESD tolerance on bus pins: ±16 kV

– Driver Dominant Time Out (TXD DTO)

– Undervoltage protection on VCC1 and VCC2

• Common-Mode Voltage Range: ±30 V

• Ideal passive, high impedance bus terminals when

unpowered

• High CMTI: 100 kV/μs

• VCC1 voltage range: 1.71 V to 5.5 V

– Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic

interface to the CAN controller

• VCC2 Voltage Range: 4.5 V to 5.5 V

• Robust Electromagnetic Compatibility (EMC)

– System-level ESD, EFT, and surge immunity

– Low emissions

• Ambient Temperature Range: –40°C to +125°C

• 16-SOIC and 8-SOIC package options

• Automotive version available: ISO1042-Q1

• Safety-related certifications:

– 7071-VPK VIOTM and 1500-VPK VIORM

(Reinforced and Basic Options) per DIN VDE

V 0884-11:2017-01

– 5000-VRMS Isolation for 1 Minute per UL 1577

– IEC 60950-1, IEC 60601-1 and EN 61010-1

certifications

– CQC, TUV and CSA certifications

2 Applications

• AC and servo drives

• Solar inverters

• PLC and DCS communication modules

• Elevators and escalators

• Industrial power supplies

• Battery charging and management

3 Description

The ISO1042 device is a galvanically-isolated

controller area network (CAN) transceiver that meets

the specifications of the ISO11898-2 (2016) standard.

The ISO1042 device offers ±70-V DC bus fault

protection and ±30-V common-mode voltage range.

The device supports up to 5-Mbps data rate in CAN

FD mode allowing much faster transfer of payload

compared to classic CAN. This device uses a silicon

dioxide (SiO2) insulation barrier with a withstand

voltage of 5000 VRMS and a working voltage of 1060

VRMS. Electromagnetic compatibility has been

significantly enhanced to enable system-level ESD,

EFT, surge, and emissions compliance. Used in

conjunction with isolated power supplies, the device

protects against high voltage, and prevents noise

currents from the bus from entering the local ground.

The ISO1042 device is available for both basic and

reinforced isolation (see Reinforced and Basic

Isolation Options). The ISO1042 device supports a

wide ambient temperature range of –40°C to +125°C.

The device is available in the SOIC-16 (DW) package

and a smaller SOIC-8 (DWV) package.