IR213集成电路（IC）的栅极驱动器规格书PDF中文资料

IR213属于集成电路（IC）的栅极驱动器。由英飞凌科技股份公司制造生产的IR213栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。

Description

The IR2136x (J&S) are high voltage, high speed power MOSFET and IGBT drivers with three independent high and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3 V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an overcurrent or undervoltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 V.

Features

• Floating channel designed for bootstrap operation

• Fully operational to +600 V

• Tolerant to negative transient voltage, dV/dt immune

• Gate drive supply range from 10 V to 20 V (IR2136/

   IR21368), 11.5 V to 20 V (IR21362D), or 12 V to 20 V

   (IR21363/IR21365/IR21366/IR21367)

• Undervoltage lockout for all channels

• Over-current shutdown turns off all six drivers

• Independent 3 half-bridge drivers

• Matched propagation delay for all channels

• Cross-conduction prevention logic

• Low side output out of phase with inputs. High side outputs

   out of phase (IR213(6,63, 65, 66, 67, 68)), or in phase

   (IR21362) with inputs

• 3.3 V logic compatible

• Lower di/dt gate drive for better noise immunity

• Externally programmable delay for automatic fault clear

• All parts are LEAD-FREE