Half-brick DC-DC Converter

The InQor® Half-brick converter series is composed of next-generation, board-mountable, isolated, fixed switching frequency dc-dc converters that use synchronous rectification to achieve extremely high power conversion efficiency. Each module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation applications.

Operational Features

• High efficiencies, up to 91 at full rated load current

• Delivers full power with minimal derating - no heatsink required

• Operating input voltage range: 9 - 36 V, 40 V transient for 100 ms

• Fixed frequency switching provides predictable EMI

• No minimum load requirement

Mechanical Features

• Industry standard Half-brick pin-out configuration

• Size: 2.390 x 2.490 x 0.512 (60.6 x 63.1 x 13.0 mm)

• Total weight: 5 oz (142 g)

Control Features

• On/Off control referenced to input side

• Remote sense for the output voltage

• Output voltage trim range of -20, +10

safety Features

• 2250 V, 30 MW input-to-output isolation

• UL 60950-1:2003, basic insulation

• CAN/CSA-C22.2 No. 60950-1:2003

• EN60950-1:2001

• CE Marked

• RoHS compliant (see Page 28)

Protection Features

• Input under-voltage lockout

• Input over-voltage shutdown

• Output current limit and short circuit protection

• Active back bias limit

• Thermal shutdown