5 Port 10/100 Ethernet Integrated Switch

文件：752.36 Kbytes 页数：69 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

5-port 10/100M Layer 2 + Ethernet Integrated Switch

IP175D integrates a 6-port switch controller, SSRAM, and 5 10/100 Ethernet transceivers. Each of the transceivers compliers with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The DSP approach is utilized for designing transceivers with 0.16um technology; they have high noise immunity and Built in 6 MAC and 5 PHY\r\nEach port can be configured to be 10Base-T, 100Base-TX\r\nUp to 2K MAC address\r\nSupport auto-polarity for 10Mbps\r\nBroadcast storm protection\r\nAuto MDI-MDIX\r\nSupport three MII/RMII ports\r\nLayer2-4 Multi-Field classifier\r\n- Support 8-MultiField entry \r\n- Suppo;

IC+

九旸电子

5-port 10/100M Ethernet Integrated Switch

IP175G is fabricated with advanced CMOS(85nm/Low Power) technology and only requires a 3.3V sinlge power supply. This feature makes IP175G consumes very low power, such as the full load operation (100Mbps_FDX x8) and embedded LDO, overall power consumption only takes 0.55w. 5 port Embedded 10/100 PHY Switch Controller\r\n\r\nSupport 5 100BaseTX or 4 100Base TX + 1 FX\r\n\r\nSupport Auto MDI-MDIX function\r\n\r\nPower Management Tool (PWMT®)\r\n- APS, auto-power saving while Link-off \r\n- IEEE 802.3az protocol based power saving & 10Mbps Te for 10Mbps ;

IC+

九旸电子

4 Port FE Ethernet Switch

IP175LLF integrates a 5-port switch controller, SSRAM, and 4 10/100 Ethernet transceivers. Each of the transceivers compliers with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The DSP approach is utilized for designing transceivers with 0.16um technology; they have high noise immunity a • Wide operating temperature range\n• IP175LLF (0°C to 70°C)\n• IP175LLFI (-40°C to 85°C)\n\n• Built-in 5 MAC and 4 PHY\n• Each port can be configured to be 10Base-T and 100Base-TX\n• Up to 2K MAC addresses\n• Support auto-polarity for 10Mbps\n• Broadcast storm protection\n• Auto MDI-MDIX\n• Support;

IC+

九旸电子