TXS0108ERGYR 中文资料规格参数
技术参数
电源电压(DC)1.20 V (min)
位数8
其他
产品生命周期Active
包装方式Cut Tape (CT)， Tape & Reel (TR)
封装参数
引脚数20
封装VQFN
外形尺寸
封装VQFN
符合标准
RoHS标准Compliant
含铅标准Lead Free
REACH SVHC标准 No SVHC
产品概述
TEXAS INSTRUMENTS TXS0108ERGYR 芯片， 电平转换器， 8位， VQFN-20
The TXS0108ERGYR is a 8-bit Bidirectional Voltage-level Shifter for open-drain and_push-pull applications. This non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA and_accepts any supply voltage from 1.65 to 3.6V. VCCA must be less than or equal to VCCB. The B port is designed to track VCCB and_accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.2， 1.5， 1.8， 2.5， 3.3 and_5V voltage nodes. When the output-enable (OE) input is low， all outputs are placed in the high-impedance state. The TXS0104E is designed so that the OE input circuit is supplied by VCCA. To ensure the high-impedance state during power up or power down， OE should be tied to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of the driver.
.No direction-control signal needed.Maximum data rates (60Mbps (push pull)， 2Mbps (open drain)).1.2 to 3.6V on A port and_1.65 to 5.5V on B port (VCCA .No power-supply sequencing required， either VCCA or VCCB can be ramped first.Latch-up performance exceeds 100mA per JESD 78， class II.Green product and_no Sb/Br
This device has limited built-in ESD protection， leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
