General Purpose PIR Controller

General Description The HT761x is a CMOS LSI chip designed for use in automatic PIR lamp control. It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications. The chip is equipped with operational amplifiers, a comparator, timer, a zero

文件：164.56 Kbytes 页数：11 Pages

Holtek

合泰

General Purpose PIR Controller

文件：154.86 Kbytes 页数：12 Pages

Holtek

合泰

General Purpose PIR Controller

Holtek

合泰

General Purpose PIR Controller

文件：154.86 Kbytes 页数：12 Pages

Holtek

合泰

General Purpose PIR Controller

文件：181.6 Kbytes 页数：13 Pages

Holtek

合泰

General Purpose PIR Controller

文件：181.6 Kbytes 页数：13 Pages

Holtek

合泰

General Purpose PIR Controller

文件：154.86 Kbytes 页数：12 Pages

Holtek

合泰

General Purpose PIR Controller

The HT761X is a CMOS LSI chip designed for use in automatic PIR lamp control. It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications. The chip is equipped with operational amplifiers, a comparator, timer, a zero crossing detector, cont • Operating voltage: 5V~12V\n• Standby current: 100uA (Typ.)\n• On-chip regulator\n• Adjustable output duration\n• CDS input\n• 40 second warm-up\n• ON/AUTO/OFF selectable by MODE pin\n• Override function\n• Auto-reset if the ZC signal disappears over 3 seconds\n• 16-pin DIP package;

Holtek

合泰

General Purpose PIR Controller

The HT761X is a CMOS LSI chip designed for use in automatic PIR lamp control. It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications. The chip is equipped with operational amplifiers, a comparator, timer, a zero crossing detector, cont • Operating voltage: 5V~12V\n• Standby current: 100uA (Typ.)\n• On-chip regulator\n• Adjustable output duration\n• CDS input\n• 40 second warm-up\n• ON/AUTO/OFF selectable by MODE pin\n• Override function\n• Auto-reset if the ZC signal disappears over 3 seconds\n• 16-pin DIP package;

Holtek

合泰