General Purpose PIR Controller

文件：154.86 Kbytes 页数：12 Pages

Holtek

合泰

General Purpose PIR Controller

文件：181.6 Kbytes 页数：13 Pages

Holtek

合泰

General Purpose PIR Controller

The HT761X is a CMOS LSI chip designed for use in automatic PIR lamp control. It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications. The chip is equipped with operational amplifiers, a comparator, timer, a zero crossing detector, cont • Operating voltage: 5V~12V\n• Standby current: 100uA (Typ.)\n• On-chip regulator\n• Adjustable output duration\n• CDS input\n• 40 second warm-up\n• ON/AUTO/OFF selectable by MODE pin\n• Override function\n• Auto-reset if the ZC signal disappears over 3 seconds\n• 16-pin DIP package;

Holtek

合泰

1.4MHz, Low Power CMOS Operational Amplifiers

文件：252.74 Kbytes 页数：13 Pages

Intersil

1.4MHz, Low Power CMOS Operational Amplifiers

文件：251.99 Kbytes 页数：13 Pages

Intersil

P-CHANNEL JFET

GENERAL INFORMATION/CROSS REFERENCES

文件：4.13074 Mbytes 页数：122 Pages

Intersil