Low Power SLIC with Battery Switch

The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for applications requiring emergency

文件：87.31 Kbytes 页数：13 Pages

Intersil

Low Power SLIC with Battery Switch

The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for applications requiring emergency

文件：293.96 Kbytes 页数：13 Pages

Intersil

Low Power SLIC with Battery Switch

The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for applications requiring em

文件：296.7 Kbytes 页数：13 Pages

Intersil

Low Power SLIC with Battery Switch

Features • Dual Battery Operation • Single Additional +5V Supply • Low Standby Power Consumption (48V, 35mW) • On Hook Transmission • Tip and Ring Disconnect • Soft or Hard Polarity Reversal • Supports 12kHz or 16kHz Pulse Metering • Ring Relay Driver • On Chip 2-wire AC/DC Loopback • 0°

文件：694.97 Kbytes 页数：13 Pages

RENESAS

瑞萨

Low Power SLIC with Battery Switch

The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for applications requiring emergency p • Dual Battery Operation\n• Single Additional +5V Supply\n• Low Standby Power Consumption (48V, 35mW)\n• On Hook Transmission\n• Tip and Ring Disconnect\n• Soft or Hard Polarity Reversal\n• Supports 12kHz or 16kHz Pulse Metering\n• Ring Relay Driver\n• On Chip 2-wire AC/DC Loopback\n• 0°C to 70°C or;

Renesas

瑞萨

Low Power SLIC with Battery Switch

The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for applications requiring emergency

文件：293.96 Kbytes 页数：13 Pages

Intersil

Low Power SLIC with Battery Switch

The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for applications requiring em

文件：296.7 Kbytes 页数：13 Pages

Intersil

Low Power SLIC with Battery Switch

Features • Dual Battery Operation • Single Additional +5V Supply • Low Standby Power Consumption (48V, 35mW) • On Hook Transmission • Tip and Ring Disconnect • Soft or Hard Polarity Reversal • Supports 12kHz or 16kHz Pulse Metering • Ring Relay Driver • On Chip 2-wire AC/DC Loopback • 0°

文件：694.97 Kbytes 页数：13 Pages

RENESAS

瑞萨

Low Power SLIC with Battery Switch

The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for applications requiring emergency

文件：87.31 Kbytes 页数：13 Pages

Intersil

Low Power SLIC with Battery Switch

The HC5549 Subscriber line interface circuit is a 100V diellectrically isolated bipolar integrated circuit for use in short loop ISDN, PABX and Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for applications requiring emergency

文件：293.96 Kbytes 页数：13 Pages

Intersil