GS2974A中文资料3G-SDI Adaptive Cable Equalizer数据手册Semtech规格书

描述 Description

The GS2974A is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75ohm co-axial cable.
The GS2974A is designed to support SMPTE 424M, SMPTE 292M and SMPTE 259M, and is optimized for performance at 1.485Gb/s and 2.97Gb/s.The GS2974A features DC restoration to compensate for the DC content of SMPTE pathological test patterns.A voltage programmable mute threshold (MCLADJ), applicable for HD and SD mode (refer to Section 5.2), is included to allow muting of the GS2974A output when an approximate selected cable length is reached for SMPTE 259M signals. This feature allows the GS2974A to distinguish between low amplitude SD-SDI signals and noise at the input of the device. The serial digital outputs of the GS2974A may be forced to a mute state by applying a voltage to the MUTE pin.Power consumption is typically 215mW using a 3.3V power supply. The GS2974A is lead-free, and the encapsulation compound does not contain halogenated flame retardant.This component and all homogeneous subcomponents are RoHS compliant.

特性 Features

• SMPTE 424M, SMPTE 292M and SMPTE 259M compliant
• Automatic cable equalization
• Multi-standard operation from 143Mb/s to 2.97Gb/s
• Supports DVB-ASI at 270Mb/s
• Small footprint (4mm x 4mm)
• Pb-free and RoHS compliant
• Manual bypass (useful for low data rates with slow rise/fall times)
• Performance optimized for 1.485Gb/s and 2.97Gb/s
• Typical equalized length of Belden 1694A cable: 120m at 2.97Gb/s, 200m at 1.485Gb/s, and 350m at 270Mb/s
• 50Ohm differential output (internal 50Ohm pull-ups)
• Programmable mute based on max cable length adjust
• Single 3.3V power supply operation
• Operating temperature range: 0°C to +70°C

应用 Application

·SMPTE 424M, SMPTE 292M and SMPTE 259M Coaxial Cable Serial Digital Interfaces