GS2960A数据手册集成电路（IC）的视频处理规格书PDF

描述 Description

The GS2960A is a multi-rate SDI receiver which includes complete SMPTE processing, as per SMPTE 425M, 292M and SMPTE 259M-C.

The SMPTE processing features can be bypassed to support signals with other coding schemes.
The device features an integrated reclocker with an internal VCO and a wide Input Jitter Tolerance (IJT) of 0.7UI.
A serial digital loop through output is provided, which can be configured to output either reclocked or non-reclocked serial digital data. The serial digital output can be connected to an external cable driver. The device operates in one of four basic modes: SMPTE mode, DVB-ASI mode, Data-Through mode or Standby mode.
In SMPTE mode, the GS2960A performs full SMPTE processing, and features a number of data integrity checks and measurement capabilities.
The device also supports ancillary data extraction, and can provide entire ancillary data packets through host-accessible registers. It also provides a variety of other packet detection and error handling features. All of these processing features are optional, and may be individually enabled or disabled through register programming.
Both SMPTE 425M Level A and Level B inputs are supported with optional conversion from Level B to Level A for 1080p 50/60 4:2:2 10-bit.
In DVB-ASI mode, 8b/10b decoding is applied to the received data stream.
The device can also operate in a lower power Standby mode. In this mode, no signal processing is carried out and the parallel output is held static.
In Data-Through mode all forms of SMPTE and DVB-ASI decoding are disabled, and the device can be used as a simple serial to parallel converter.
Parallel data outputs are provided in 20-bit or 10-bit format for 3Gb/s, HD and SD video rates, with a variety of mapping options. As such, this parallel bus can interface directly with video processor IC's, and can be multiplexed onto 10 bits for a low pin count interface.

特性 Features

Integrated reclocker with low phase noise, integrated, VCO
Ancillary data extraction
Comprehensive error detection and correction features
Serial digital reclocked, or non-reclocked output
Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s
Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M, SMPTE 259M-C and DVB-ASI
Optional conversion from SMPTE 425M Level B to Level A for 1080p 50/60 4:2:2 10-bit
Parallel data bus selectable as either 20-bit or 10-bit
Output H, V, F or CEA 861 Timing Signals
1.2V digital core power supply, 1.2V and 3.3V analog power supplies, and selectable 1.8V or 3.3V I/O power supply
GSPI host interface
-20°C to +85°C operating temperature range
Low power operation (320 mW typical)
Small 11mm x 11mm 100-ball BGA package
Pb-free and ROHS compliant

应用 Application

Monitors
Camera control units
Multiviewers
Production switchers
Master control switchers
VTRs
Video servers
Encoders/decoders
Up/down/cross converters
Audio de-embedders
Format detectors
Test and measurement equipment

简介

GS2960A属于集成电路（IC）的视频处理。由制造生产的GS2960A视频处理一种集成电路 (IC) 半导体器件，设计用于在放大、增强、编码器和解码器（编解码器）、缓冲、校准、处理、信号调节、调制与解调、转换、传输、伽玛校正、切换、OSD、数字化和多路复用等应用中处理音频和/或视频信号。