GPL95100UA中文资料High-end 16-bit Interactive LCD Toy & Game Controller数据手册Generalplus规格书

描述 Description

GPL95100UA, a highly integrated System-on-a-Chip (SoC),  is a cost-effective and high performance micro-controller solution for game, education and interactive learning applications.  It equips a m’nSP® 2.0 CPU with 8KB I-cache, picture process unit (PPU),  16-channel sound process unit (SPU), SPI Flash controller, NAND FLASH Memory controller with ECC/BCH, two channel DMA controller, USB device, mono STN-LCD and TFT-LCD interface, interrupt controller, and many other useful features.  Providing a complete set of common system peripherals, GPL95100UA minimizes overall system costs and saves many additional components that other microcontrollers may require.  The GPL95100UA development system integrates several powerful tools such as system with C language, assembly compiler, linker, source debugger, and project management function.

特性 Features

• Built-in 16-bit m’nSP® 2.0 microprocessor with:
• operating voltage from 2.9V to 5.5V.
• Memories
• I/O Ports
• Each incorporates with pull-up resistor, pull-down resistor or floating input as programmer’s settings on the corresponding registers
• Clock Management
• 32768Hz Crystal input @ 1.62V~1.98V
• Flexible Power Management (Operating/ Power down/ Wait/ Halt Mode)
• Deep Halt mode: 3.3V/1.8V off and only RTC on with  approx. 5uA current consumption.
• Halt mode: CPU and system clocks are all off. Only  RTC, 32768Hz-XTAL, and LDOs modules are active
• Picture Process Unit (PPU)
• QVGA output
• Up to 1024 x 1024 Text Size
• TFT-LCD controller
• UPS052 (serial RGB dummy),
• I80 (8-bit/16-bit system bus) I/F type
• Supports various LCD resolutions: 160x128, 220x176, and 320x240
• Mono and 16-gray STN-LCD controller interface
• 16 hardware PCM/ADPCM channels
• 16-channel capacitive touch detection
• 29 sources Interrupt Controller.
• Watchdog timer.
• 11-output x 8-input matrix key scan controller.
• Four re-loadable timers/counters support comparison, PWM, capture and BAM (4-bit angle modulation)
• Power controller with on power-on key and one system power enable output pad.
• Low voltage reset(LVR)( 2.4V trigger/2.6V release for 3.3V)
• DAC: Two 16-bit DACs (R2R DAC for L-R speaker), 1x14-bit push-pull AMP
• One for MIC in with PGA and digital AGC
• One for 8-channel line-in