FNB81560T3中文资料智能功率模块，600V，15A数据手册ONSEMI规格书

描述 Description

FNB81560T3 is a Motion SPM 8 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs tominimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, inter-lock function, over-current shutdown, thermal monitoring of drive IC, and fault reporting. Thebuilt-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust shortcircuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.

特性 Features

• UL Certified No. E209204 (UL1557)
• 600V - 15A 3-Phase IGBT Inverter Control IC for Gate Drive and Protections
• Low-Loss, Short-Circuit Rated IGBTs
• Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
• Active-high interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input
• HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection
• Fault Output for Under-Voltage and Short-Circuit Current Protection
• Inter-Lock Function to Prevent Short-Circuit
• Shut-Down Input
• HVIC Temperature-Sensing Built-In for Temperature Monitoring
• Isolation Rating: 1500 Vrms / min

简介

FNB81560T3属于分立半导体产品的功率驱动器模块。由制造生产的FNB81560T3功率驱动器模块功率驱动器模块为电源组件（通常为半桥或单相、两相或三相配置的 IGBT 和 MOSFET）提供物理防护。功率半导体或裸片将焊接或烧结在基材上，后者可承载功率半导体并在需要时提供电和热触点以及电绝缘。功率模块提供更高的功率密度，并且在许多情况下更可靠且更易于冷却。