General Description

FNA41560T2 is a Motion SPM 45 module providing

a fully−featured, high−performance inverter output stage for AC

Induction, BLDC, and PMSM motors. These modules integrate

optimized gate drive of the built−in IGBTs to minimize EMI

and losses, while also providing multiple on−module protection

features including under−voltage lockouts, over−current shutdown,

thermal monitoring of drive IC, and fault reporting. The built−in,

high−speed HVIC requires only a single supply voltage and translates

the incoming logic−level gate inputs to the high−voltage, high−current

drive signals required to properly drive the module’s internal IGBTs.

Separate negative IGBT terminals are available for each phase

to support the widest variety of control algorithms.

Features

• UL Certified No. E209204 (UL1557)

• 600 V − 15 A 3−Phase IGBT Inverter with Integral Gate Drives

and Protection

• Low Thermal Resistance Using Ceramic Substrate

• Low−Loss, Short−Circuit−Rated IGBTs

• Built−In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB

Layout

• Built−In NTC Thermistor for Temperature Monitoring

• Separate Open−Emitter Pins from Low−Side IGBTs for Three−Phase

Current Sensing

• Single−Grounded Power Supply

• Isolation Rating of 2000 Vrms / 1 min.

• This is a Pb−Free and Halogen Free/BFR Free Device

Applications

• Motion Control − Home Appliance / Industrial Motor

FNA41560T2属于分立半导体产品 > 功率驱动器模块。安森美半导体公司制造生产的FNA41560T2功率驱动器模块功率驱动器模块为电源组件（通常为半桥或单相、两相或三相配置的 IGBT 和 MOSFET）提供物理防护。功率半导体或裸片将焊接或烧结在基材上，后者可承载功率半导体并在需要时提供电和热触点以及电绝缘。功率模块提供更高的功率密度，并且在许多情况下更可靠且更易于冷却。