FNA25012A中文资料智能功率模块，1200V，50A数据手册ONSEMI规格书

描述 Description

The FNA25012A is a Motion SPM® 2 module providing a fully-featured, high-performance inverter output stage for AC induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logiclevel gate inputs to high-voltage, high-current drive signals to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.

特性 Features

• UL Certified No. E209204 (UL1557)
• 1200 V - 50 A 3-Phase IGBT Inverter, Including Control ICs for Gate Drive and Protections
• Low-Loss, Short-Circuit-Rated IGBTs
• Very Low Thermal Resistance Using AlN DBC Substrate
• Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
• Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
• Single-Grounded Power Supply Supported
• Built-In NTC Thermistor for Temperature Monitoring and Management
• Adjustable Over-Current Protection via Integrated Sense-IGBTs
• Isolation Rating of 2500 Vrms / 1 min.

应用 Application

• Motion Control - Home Appliance/Industrial Motor

简介

FNA25012A属于分立半导体产品的功率驱动器模块。由制造生产的FNA25012A功率驱动器模块功率驱动器模块为电源组件（通常为半桥或单相、两相或三相配置的 IGBT 和 MOSFET）提供物理防护。功率半导体或裸片将焊接或烧结在基材上，后者可承载功率半导体并在需要时提供电和热触点以及电绝缘。功率模块提供更高的功率密度，并且在许多情况下更可靠且更易于冷却。