EN25F80-100QIP数据手册EON中文资料规格书

描述 Description

GENERAL DESCRIPTION
The  EN25F80  is  an  8M-bit  (1024K-byte)  Serial  Flash  memory,  with  advanced  write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
The  EN25F80  is  designed  to  allow  either  single  Sector/Block  at  a  time  or  full  chip  erase  operation.  The EN25F80  can  be  configured  to  protect  part  of  the  memory  as  the  software  protected  mode.  The  device  can sustain a minimum of 100K program/erase cycles on each sector or block.FEATURES
·  Single power supply operation
-  Full voltage range: 2.7-3.6 volt
·  Serial Interface Architecture
-  SPI Compatible: Mode 0 and Mode 3
·  8 Mbit Serial Flash
-  8 M-bit/1024 K-byte/4096 pages
-  256 bytes per programmable page
·  High performance
-  100MHz clock rate
·  Low power consumption
-  12 mA typical active current
-  1 mA typical power down current
·  Uniform Sector Architecture:
-  256 sectors of 4-Kbyte
-  16 blocks of 64-Kbyte
-  Any sector or block can be erased individually
·  Software and Hardware Write Protection:
-  Write Protect all or portion of memory via software
-  Enable/Disable protection with WP# pin
·  High performance program/erase speed
-  Page program time: 1.3ms typical
-  Sector erase time: 90ms typical
-  Block erase time 500ms typical
-  Chip erase time: 8 seconds typical
·  Lockable 256 byte OTP security sector
·  Minimum 100K endurance cycle
·  Package Options
-  8 pins SOP 150mil body width
-  8 pins SOP 200mil body width  
-  8 contact VDFN
-  8 pins PDIP
-  All Pb-free packages are RoHS compliant
·  Commercial and industrial temperature Range

特性 Features

·  Single power supply operation
-  Full voltage range: 2.7-3.6 volt
·  Serial Interface Architecture
-  SPI Compatible: Mode 0 and Mode 3
·  8 Mbit Serial Flash
-  8 M-bit/1024 K-byte/4096 pages
-  256 bytes per programmable page
·  High performance
-  100MHz clock rate
·  Low power consumption
-  12 mA typical active current
-  1 mA typical power down current
·  Uniform Sector Architecture:
-  256 sectors of 4-Kbyte
-  16 blocks of 64-Kbyte
-  Any sector or block can be erased individually
·  Software and Hardware Write Protection:
-  Write Protect all or portion of memory via software
-  Enable/Disable protection with WP# pin
·  High performance program/erase speed
-  Page program time: 1.3ms typical
-  Sector erase time: 90ms typical
-  Block erase time 500ms typical
-  Chip erase time: 8 seconds typical
·  Lockable 256 byte OTP security sector
·  Minimum 100K endurance cycle
·  Package Options
-  8 pins SOP 150mil body width
-  8 pins SOP 200mil body width  
-  8 contact VDFN
-  8 pins PDIP
-  All Pb-free packages are RoHS compliant
·  Commercial and industrial temperature Range