EN25F20-75GC数据手册EON中文资料规格书

描述 Description

GENERAL DESCRIPTION
The EN25F20 is a 2M-bit (256K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
The EN25F20 is designed to allow either single Sector/Block at a time or full chip erase operation. The EN25F20 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block.FEATURES
• Single power supply operation
   - Full voltage range: 2.7-3.6 volt
• Serial Interface Architecture
   - SPI Compatible: Mode 0 and Mode 3
• 2 Mbit Serial Flash
   - 2 M-bit/256 K-byte/1024 pages
   - 256 bytes per programmable page
• High performance
   - 100MHz clock rate
• Low power consumption
   - 12 mA typical active current
   - 1 µA typical power down current
• Uniform Sector Architecture:
   - 64 sectors of 4-Kbyte
   - 4 blocks of 64-Kbyte
   - Any sector or block can be erased individually
• Software and Hardware Write Protection:
   - Write Protect all or portion of memory via software
   - Enable/Disable protection with WP# pin
• High performance program/erase speed
   - Page program time: 1.5ms typical
   - Sector erase time: 150ms typical
   - Block erase time 800ms typical
   - Chip erase time: 3 Seconds typical
• Lockable 256 byte OTP security sector
• Minimum 100K endurance cycle
• Package Options
   - 8 pins SOP 150mil body width
   - 8 contact VDFN
   - All Pb-free packages are RoHS compliant
• Commercial and industrial temperature Range

特性 Features

• Single power supply operation
   - Full voltage range: 2.7-3.6 volt
• Serial Interface Architecture
   - SPI Compatible: Mode 0 and Mode 3
• 2 Mbit Serial Flash
   - 2 M-bit/256 K-byte/1024 pages
   - 256 bytes per programmable page
• High performance
   - 100MHz clock rate
• Low power consumption
   - 12 mA typical active current
   - 1 µA typical power down current
• Uniform Sector Architecture:
   - 64 sectors of 4-Kbyte
   - 4 blocks of 64-Kbyte
   - Any sector or block can be erased individually
• Software and Hardware Write Protection:
   - Write Protect all or portion of memory via software
   - Enable/Disable protection with WP# pin
• High performance program/erase speed
   - Page program time: 1.5ms typical
   - Sector erase time: 150ms typical
   - Block erase time 800ms typical
   - Chip erase time: 3 Seconds typical
• Lockable 256 byte OTP security sector
• Minimum 100K endurance cycle
• Package Options
   - 8 pins SOP 150mil body width
   - 8 contact VDFN
   - All Pb-free packages are RoHS compliant
• Commercial and industrial temperature Range